User's Manual

GB
9
Using the H200 as a hands-free speaker phone
The H200 can be used as a hands-free accessory for your phone.
When music is playing through your H200 and you receive a call on
your phone it can pause the music automatically to allow you to answer
your phone.
1. Pair your device to the speaker via Bluetooth as described in the
previous sections.
2. If you receive a call while playing music through your H200, the Call
indicator ( ) will ash a fast yellow.
3. Press and release the Call answer-hangup button to answer your
phone call and then the Call indicator ( ) will remain a solid yellow.
Speak in the direction of the built-in microphone.
4. Press the Volume up/down buttons to adjust the volume to your liking.
Note that a very high volume setting may decrease sound quality.
5. Press and release the Call answer-hangup button to end the phone
call. The music on the speaker will continue to play.
Note:
If you cannot answer/hang up your phone via your H200, it may be
necessary to check whether the ‘Phone audio’ setting is activated on
your Bluetooth –enabled device.
Battery management
To check the current battery charge level, press and hold the Power
button to turn on the speaker and battery status indicator is shown in
solid green indicating the current battery life:
( ): battery is fully charged (more than 70% of battery capacity)
( ): battery is medium charged (between 30%- 70% of battery
capacity)
( ): battery Charging is needed (less than 30% of batterycapacity)