User's Manual

Controls

Aux in socket

DC In

Power button

Volume up button

Volume down button

Bluetooth button

Folding handle

Passive speaker

NFC detection tag

Battery status indicator

Call answer-hangup button/Call

indicator

Battery charging indicator

Bluetooth status indicator

Max volume indicator

Microphone

Powered Speaker

Charging the unit

This unit operates on a built-in Lithium-ion battery that can be recharged

either using the USB charging port or from a USB power adaptor (not

included) with a rated output of DC 5V, 1000mA.

The rst time using your H200 speaker, connect it to DC (mains) power

and fully charge the battery. When the battery is in charging mode, the

battery charging indicator light will be in solid red. After the battery is

fully charged, the red battery charging indicator will turn off.

Note:

You can begin using the speaker while charging. Please be aware that

in this case make sure the USB power source can provide 5V 1A of

electrical current. If not, it may damage the USB power source.

1. Connect the (supplied) micro USB plug to the micro USB charging

port on the left hand side of the unit.

2. Connect the (supplied) standard USB plug end of the cable to a

power USB port on a computer or other USB charging device. When

the battery is charging, the battery indicator light will be solid red. If

the indicator light fades away this indicates that the battery is fully

charged and battery charging will be stopped.