User's Manual
4
Power on the speaker
There are two ways to power on your speaker.
● You can press and hold the Power button to turn on the speaker.
● In addition, the speaker can be powered on via NFC: Turn on the
NFC feature on your NFC-enabled device > Hold your NFC-enabled
device directly against the H200’s NFC tag for 2 seconds. Once the
speaker is powered on successfully, the speaker will make a sound to
conrm the power is on.
Note:
Some devices may ask for conrmation from the user.
Pairing and connecting a device to the speaker
Pairing and playing your Bluetooth device for the rst time
You need to pair your Bluetooth device with your H200 before you
can auto-link to play/stream Bluetooth music through your Bluetooth
speaker. Paring creates a `bond' so the two devices can recognize each
other.
1. Turn on the speaker. The Bluetooth status indicator ( ) on the
speaker will ash a fast blue to show the speaker is discoverable.
2. Activate Bluetooth on your device according to the device's user
manual to link to the speaker. Locate the Bluetooth device list and
select the device named ‘H200’. With some mobile devices (which
are equipped with earlier versions than BT2.1 Bluetooth device), you
may need to input the pass code “0000”.
3. Once connected, there will be a confirmation tone sound and the
Bluetooth icon will turn a solid blue. You can simply select and play
any music from your source device. Volume control can be adjusted
from your source device, or directly on H200. (
Note:
If the maximum
volume of the speaker has been reached, the indicator for ‘MAX
VOL.’ marked on the front panel will stay solid red for 2 seconds.)