User's Manual

Pairing additional devices

Before pairing another device to the speaker, you need to make the

speaker discoverable.

1. Press and release the Bluetooth button to disconnect from your

Bluetooth device. The Bluetooth status indicator ( ) blinks a fast

ashing blue.

2. Activate Bluetooth on your device according to the device's user

manual to link to the speaker. Locate the Bluetooth device list and

select the device named ‘H200’. With some mobile devices which are

equipped with earlier versions than BT2.1 Bluetooth device, you may

need to input the pass code “0000”.

3. Once connected, there will be a confirmation tone sound and the

Bluetooth icon will remain in solid blue. You can simply select and

play any music from your source device.

Speaker memory and reconnecting a device

The H200 can memorize up to 2 paired devices. When the memory

exceeds this amount, the earliest paired device will be erased from the

speaker. If your Bluetooth device was already paired with the speaker

previously, the unit will memorize your Bluetooth device and will

attempt to reconnect with a device that is in the memory that was last

connected. If the last connected device is not available, the speaker will

be discoverable.

Disconnecting your Bluetooth device

Press and release the Bluetooth button on the H200 to disconnect with

your Bluetooth device or turn off Bluetooth function on your Bluetooth

device to disable the connection. There will be a confirmation tone

sound and the Bluetooth status indicator ( ) on the speaker will ash a

fast blue to show the speaker is discoverable again for pairing.