User's Manual
13
Never use the Aux-In socket in
rainy or moist conditions to pre-
vent moist from entering the
SysRock. Make sure that the
rubber cover on top fits thightly
when operating in a moist envi-
ronment.
5.11 Setup options
Attachment handle [1-1]
The folding attachment handle allows
you to hang the device from scaffold-
ing or similar structures.
If you decide to power the device
with an external Festool battery
pack, the attachment handle
must be detached beforehand
[2A]
.
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached
to the threaded tripod socket [2-1].
6 Service and maintenance
WARNING
Any maintenance or repair
work that requires opening the hous-
ing may only be carried out by an au-
thorised Customer Service Centre
(name supplied by your dealer)!
Maintenance or repair work carried
out by an unauthorised person can
lead to the wrong connection of the
power cord or other components,
which in turn can lead to accidents
with serious consequences
Customer service and re-
pair
only through manufac-
turer or service workshops:
Please find the nearest address at:
www.festoolusa.com/service
Use only original Festool
spare parts! Order No. at:
www.festoolusa.com/ser-
vice
– Always clean the display
[1-8]
and speaker grill
[1-6]
on the
SysRock using a soft, dry cloth to
prevent any damage. Do not use
solvents.
– Keep the contacts on the SysRock
and battery pack clean.
7 Environment
Do not dispose of the device as do-
mestic waste!
Dispose of machines,
accessories and packaging at an en-
vironmentally responsible recycling
centre. Observe the respective na-
tional regulations.
EKAT
1
2
3
5
4