User's Manual

8
5 Commissioning
5.1 Operating with switching
adapter
Plug in switching adapter
[1-9] in connecting sock-
et [1-2] and power outlet.
5.2 Operating with external Fes-
tool battery pack [2A] + [2B]
The device can operate with Festool
battery packs from the BP or BPC se-
ries (see Technical data). When con-
nected to the external Festool battery
pack, the device only consumes pow-
er from this battery pack.
CAUTION Always attach the battery
pack completely. If not, it may acci-
dentally fall out of the battery bay,
causing injury to you or someone
around you.
CAUTION Do not force attach the bat-
tery pack. If the battery pack does not
slide in smoothly and does not en-
gage, it is not being inserted correct-
ly.
CAUTION For optimal performance,
we recommend connecting to an 18V
Li-Ion battery pack.
5.3 Switch on/off
 To switch on: Press the power but-
ton [1-5] .
The radio is ready for operation.
 To switch off: Press and hold the
power button
[1-5] for a second.
5.4 Volume control
Press the volume control [a]
and [k] to adjust the desired
volume.
 For a better sound quality using
an external device, adjust the
volume on the external device
to maximum 70%.
5.5 Checking battery status
To check the current battery level,
press the power button
[1-5] to
switch on the radio. The battery sta-
tus indicator [e] will show the current
battery level (only with Li-Ion battery
pack).
5.6 Operating your radio - FM
 Straighten up the antenna [1-3].
 Press the source but-
ton [j] until the FM mode
is selected.
Battery is fully charged
Battery is partially
charged
Battery low - charging
required
battery critical - alterna-
tive power source
required immediately.