User's Manual

9
FM auto-tune
 Press and hold (~1 sec.) the Tuning
control
[i] , [h] to carry out an auto-
tune.
Your radio will stop scanning when it
finds a station of sufficient strength.
The display will show the frequency
of the signal found. If the signal is
strong enough and there is RDS data
present, the radio may display the
station name, radio text and clock
time.
Finding other stations
 Press the Tuning control [i] , [h] as
before.
When the end of the waveband is
reached, your radio will restart tun-
ing from the opposite end of the
waveband.
 If you find that FM reception is
poor, try repositioning the an-
tenna.
Manual tuning -FM
 Press the Tuning control [i] , [h] to
tune to a station.
The frequency will change in steps of
0.1 MHz.
5.7 Using preset stations
You may store your preferred FM ra-
dio stations to the preset stations.
There are four memory presets in
your radio.
 Press and hold (~1 sec.) the Preset
button
[b] , [c] , [f] or [g] until the
display show <SET MEMO>.
The station will be accessible via the
chosen preset button. The preset
number P1 to P4 will be shown in the
display.
Repeat this procedure as required for
the remaining presets. Stations
stored in preset memories may be
overwritten by retracing the steps
above.
Recalling preset stations
 Press the required Preset button
[b] , [c] , [f] or [g] to tune to the sta-
tion stored in preset memory.
5.8 Clock time - Radio Data Sys-
tem
Your radio will synchronize and dis-
play clock time [d] whenever it tunes
to a radio station using RDS with CT
signals. If the station has sufficient
signal strength the clock will auto-
matically synchronize within one or