User manual

81
Inserting and removing memory devices
1. To insert an SD card into your radio push the card label side upward and gold contacts rst
into the card slot until it clicks. To remove the card, push the card in so that it clicks once more.
It will then be pushed out slightly allowing removal.
USB memory devices plug into the rectangular slot on rear of the radio.
2. To select either SD card or USB mode press the Media button until the desired mode is shown
on the display.
Playing MP3 / WMA les - SD / USB
1. Press the Play/Pause button to start playing from the SD card/USB memory device. The
display will show the rst folder and le numbers - " 01" and " 001".
2. To pause playing press the Play/Pause button. To resume playing press the Play/Pause
button again.
3. To stop play, press the Stop button. The total number of les and folders on the media and the
stop symbol ( ) will be displayed.
4. If you put the unit into standby mode without pressing the Stop button, then the next time the
unit is switched on it will return to the previously played le.
USB 12:34
F01 T001 00:00
Playing
USB 12:34
F01 T001 00:00
Pause