Instructions

11
Manual tuning – FM
1. Press and hold the Power button to switch on your radio.
2. Press the Band button to select the FM band.
3. Press and release the Select button until the display shows
“Manual tune”.
4. Press either Tuning Up or Down button to tune to a station. The
frequency will change steps of 50kHz. Pressing and holding
one of the buttons will advance the frequency selection several
times each second.
5. When the end of the waveband is reached the radio will
recommence tuning from the opposite end of the waveband.
6. Adjust the Volume control to the required setting.
7. To cancel the Manual Tune option, press and release the Select
button again so that the display shows “Auto tune ”.
Display modes – FM
On FM the bottom line of the display can be set to any of the
following modes:
1. Press the Info button to cycle through the various options.
a. Radio text Displays scrolling text messages such as
artist/track name, phone in number etc.
b. Program type Displays the program information for the
station being listened to e.g. Pop, Classic,
News, etc.
c. Time and date Displays the current time and date.
d. Frequency Displays the frequency of the station being
listened to.
e. Audio Type Displays the audio type for the station being
listened to.
f . Battery capacity Displays current battery capacity of using
batteries operation. (If your radio is powered
by USB cable or USB power adapter, no
battery capacity is shown on the screen.)
Note:
These FM mode information displays are only available when the
radio is able to receive RDS information from the broadcaster.