User manual

18
Turn on the radio and select a waveband by pressing
BAND button. Press and hold either the Tuning UP or
Down buttons for more than half a second to commence
scan tuning. The radio will scan the station frequency and
stop automatically each time if finds an active station.
When the waveband end is reached, the radio will beep
and continue tuning from the opposite waveband end.
5. Memory recall stations
You can store up to 108 preset station, 36 preset each
on MW/FM/SW band. To store a station in preset
memory, proceed as below.
a. Turn on by radio by pressing Power button
b. Tune to desired station using one of the previously
described tuning methods.
c. Press the Memory button M, the memory symbol
together with suggested memory page and preset
number will ash for a few seconds.
d. Selected the required preset page A to D by pressing
PAGE button and preferred preset number (1-9).
Display will ash the page and memory you select.
Display will show----, if the selected preset is empty.
Display will show previous stored station if preset has
been used.
Press the ENTER button to complete preset setting.