Operation Manual

23
Bluetooth
Bluetooth
Pairing...
BT connected:
Xperia acro S
1
Listening to Bluetooth music
You need to pair your Bluetooth device with your radio before you can auto-link to play/stream
Bluetooth music through your DPR-26BT. Paring creates a `bond' so two devices can recognize
each other.
Pairing your Bluetooth device for the rst time
1. Press the Band button to select Bluetooth band. The display will show ‘Bluetooth discoverable’
for a few second followed by ‘Bluetooth Paring.’ The Bluetooth icon ( ) on the panel will ash
to show that the radio is discoverable for pairing.
2. Activate Bluetooth on your device according to the device's user manual to link to your DPR-26BT.
With some mobiles (which are equipped with earlier version than BT2.1 Bluetooth device), you
may need to input the pass code “0000”.
3. Once connected, the screen should say ‘ BT Connected’ with your Bluetooth device model
shown on the display and the Bluetooth icon will remain lit. You can now play the music in your
Bluetooth-enabled device via DPR-26BT.
Note:
1) If there are 2 Bluetooth devices searching for DPR-26BT, it will show its availability on both devices.
However, if one device links with theDPR-26BT rst, then the other Bluetooth device won't nd
the DPR-26BT on its list.
2) If your Bluetooth-enabled device is temporarily disconnected to your DPR-26BT, you need to
manually reconnect your device again to the radio.
3) If ‘DPR-26BT’ shows on your Bluetooth device list but your device cannot connect with it, please
delete the Sangean DPR-26BT item from your list and pair the device with DPR-26BT again
following the steps described previously.
4) The effective operation range between the system and the paired device is approximately 10
meters (30 feet).
5) Any obstacle between the system and the device may reduce the operational range.