DPR-34+ GB Revision 2
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged. liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Controls 1 2 3 4 5 6 7 8 9 Headphone socket Lock switch (Note: If this is activated the radio will not operate) Telescopic antenna Power button Volume Control LCD display Loudspeaker Tuning/Menu jog wheel DC socket GB
Charging the radio The DPR 34 features a built in 1800mAH Lithium rechargeable battery to power the radio. Before operating the radio for the first time please fully charge the battery. The DPR 34 is supplied with a 5V/500 mA AC adaptor. 1. Insert the adaptor plug into the DC socket on the right side of your radio. Plug the adaptor into a standard mains outlet and the radio will begin charging the built in battery. Charging time is approx. 4 hours with radio off and 10 hours with radio on.
Setting the clock The DPR 34’s clock will automatically update each time you turn on the radio and tune to a DAB+ radio station or to an FM station which is broadcasting the time via RDS. Time display will flash 0:00 for a few seconds then display the clock time when it receives DAB+ or FM – RDS clock time signal. Initial operation – DAB+ (Digital Radio) This step is only necessary for initial setup – 1. Ensure the battery is fully charged. 2. Fully extend the telescopic antenna. 3.
Service Information – DAB+ The Service Information display - Technical information on the current status of the station being broadcast. While listening to DAB+, continually press in the jog wheel to cycle through information on a. Program type (PTY) b. Multiplex Name c. Time d. Date e. Channel and Frequency f . Bit Rate and Codec g. Signal Strength Menu Functions Press in and hold the jog wheel for 2 seconds to enter the menu list. The display will first show DAB and .
b) Back – press in the jog wheel to go back one step. c) Manual Tune – press in and turn the jog wheel to scroll the whole station list. Press in the jog wheel to select desired station. B) Back – Press in the jog wheel to go back to current listening status. C) FM mode – Press in the jog wheel to select FM band. D) Settings – Press in the jog wheel to select from following settings options: a) Auto select – Press in and turn the jog wheel to select YES or NO. Default setting is NO.
e) Set contrast – Turn and press in the jog wheel to select required LCD display contrast. Display contrast will change accordingly. f ) Set backlight – Press in the jog wheel to select Backlight Auto. Select YES and display backlight will auto shut off 12 seconds after last operation. Select NO and the display backlight will remain on. g) DRC – Dynamic Range Control (DRC) feature can make quieter sounds easier to hear, especially when your radio is used in a noisy environment.
i ) Sleep – Use the Sleep menu to set auto shut off timer. Press in the jog wheel to cycle through: Sleep off (auto shut off disabled), 90 min, 60 min, 45 min etc …. Auto shut off timer. Radio will turn off after selected sleep time has elapsed. E) Favorites – The Favorites menu is used to store and recall favorite stations. You can store a maximum of 10 stations in the DAB+ band. Store a station Tune to a station as per previous instructions, press in jog wheel to allocate Favorites menu.
Operating your radio – FM 1. Turn on the radio by pressing Power button. Press in jog wheel for 2 seconds to enter Menu. Turn jog wheel and scroll to FM Mode and press in to select the FM band. Searching tuning - FM 1. Turn the jog wheel either down or down until display shows “scanning”. 2. The radio will search in an upwards or downwards direction until it finds a station of sufficient signal strength.
Favorites The Favorites menu is used to store and recall favorite stations. You can store a maximum of 10 stations in the FM band. Store a station Tune to a station as per previous instructions, press in jog wheel to allocate Favorites menu. Press in the jog wheel again to find “Preset Store”. Turn the jog wheel to allocate preset number you wish to use (1-10). Press in the jog wheel and display will show “preset x stored”. Repeat this step to store additional presets as required.
13 bb) Press in to select Forced mono to improve reception of a weak FM signal. b) Back – Press in to return to Settings menu. c) SW version – Press in jog wheel to view software version. Press again to return to settings menu. d) Factory Reset – Press in and turn the jog wheel to select YES or NO. Select YES to erase all saved settings, station lists and favorites. All settings will revert to factory default. e) Set Contrast – Turn and press in jog wheel to select required LCD display contrast.
Key lock function The key lock function is used to prevent unintentional operation of the radio. 1. Key lock switch is located on the top panel of the radio next to headphone socket. When the key lock switch is set to LOCK, the power and volume control buttons will be disabled. Display will show “Key Locked” for a few seconds. 2. To switch off the key lock function switch the key lock button to off position. The key lock function will be disabled.
Battery Life: Approx 15 hours listening through the speaker for 4 hours a day at normal volume. Approx 18 hours of listening with headphones for 4 hours a day at normal volume. Frequency Coverage: FM 87.50 – 108 MHz DAB+ Band III 5A – 13 F Circuit Features Headphones: 32 ohm, in-ear style Output Power: 5mW (headphone). 150 mW (speaker) Speaker: 32 ohm, 36 mm diameter.
