Operation Manual
23
Setting the time format
The clock display used in stand-by mode and on the playing mode screens can be set to 12 or
24 hour format. The selected format is then also used when setting the alarms.
1. With your digital receiver switched on, press and hold the Menu button until “ALARM 1” is
ashing on the screen.
2. Rotate the Tuning control until “TIME FMT” shows on the display. Press the Tuning control to
enter the system settings menu.
3. Rotate the Tuning control to select either 12 or 24 hour format. Press and release the Tuning
control to conrm your choice of clock format. The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the digital receiver will then use the 12 hour clock for the
setting of alarms, and will display a 12 hour clock for the setting of alarms, and will display a 12
hour clock with an AM or PM indicator when in stand-by mode.