HDT-20 GB Version 1
HD Radio technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1 11. 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of the electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to so. For United States: Cautions to the user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Controls 1 18 17 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 19 24 1. LCD display 2. Mode button 3. Info button/ Preset 1 4. Alarm 1 button/ Preset 2 5. Mute button/ Preset 3 6. Volume up button/ Preset 4 7. HD seek up button/ Preset 5 8. Standby button/Power button 3 23 22 21 20 9. Tuning control/ Select/ FM/AM Seek button 10. Frequency button 11. HD seek down button/ Preset 10 12. Volume down button/ Preset 9 13. Sleep timer button/ Preset 8 14. Alarm 2 button/ Preset 7 15.
Remote control A. Standby button/Power button B. Mute button C. Key pad button1-10/0/Preset button1-10 D. Tuning up button E. HD seek down button F. Info button G.Alarm 1 button H. Nap timer button (not available in this model) I. Sleep timer button J. Alarm 2 button K. Tone button (not available in this model) L. Mono button M.Dimmer button N. Tuning down button O.Menu button P. HD seek up button Q.(FM/AM) Seek button/Select button R. Frequency button S. Volume up/down button GB T.
Power your radio Setting the clock manually 1. Connect the power cable with the radio and plug it in to a live outlet. 2. Connect the FM Dipole Antenna into the FM antenna terminal. 3. Connect the AM loop antenna into AM antenna terminal. 4. Press the Standby/Power button to turn on the radio. Note: 1. Repeatedly press the Menu button until ‘Clock Update’ is shown on the display. 2. Rotate the Tuning control knob to select ‘Manual’ and press the Tuning control knob to enter the clock time setting.
Setting the time format 1. Repeatedly press the Menu button until ‘Set 12/24 hour’ is shown on the display. 2. Rotate the Tuning control knob to select 12 or 24 hour format and press the Tuning control knob to confirm the setting. The selected format is used in standby mode, on the playing mode screen and when setting the alarms. Operating the radio This radio is equipped with four tuning methods – Scan tuning, Manual tuning, Memory presets recall and Direct Entry.
Presetting stations There are 10 presets each for FM and AM radio. They are used the same way for each operating mode. 1. Press the Standby/Power button to switch on your radio. 2. Tune to the required radio station as previously described. 3. To store the station as a preset, press and hold the Preset button and the display will show “Preset Store”. 4. Press and release the required preset number button. You will hear a beep and the station will be stored under the chosen preset.
Direct Entry Tuning Tuning region You can directly tune to a radio station by entering the station frequency. For example, to tune to station 93.30 FM, press the Mode button to select the FM band followed by pressing the FREQ button and the numerical buttons 9-3-3. To tune to 1120 AM, press the Mode button to select the AM band, followed by pressing the FREQ button and the numerical buttons 1-1-2-0. NOTE: The display will show ‘Error’ if the input frequency is incorrect or out of coverage.
Receiving Multicast Stations When the radio is tuned to an HD Radio station, it will determine that one or more Multicast stations are available and “HD1+”, for example, may appear on the display. “HD1” indicates the number of the current multicast program and plus (+) means that additional HD Radio programs are available. Rotate the Tuning control knob on the radio (or press the Tuning up/ down button on the remote control) to tune to HD2/HD3 Multicast channel.
HD Radio status 1 Multicast set index 7 Program type 2 HD Radio indicator 8 Stereo indicator 3 Preset number 9 Signal strength indicator 4 Station Frequency 10 Plus (+) indicator: additional HD Radio stations are available 5 Station name 11 Title 6 Artist 1 2 3 4 5 6 7 8 9 GB 10 11 b. Guide mode (If the radio is tuned to an HD Radio station with Multicasts) c. Clock Setting the alarm clock Your radio has 2 separate alarms which can be set to wake you to FM or AM.
4. Rotate the Tuning control knob to choose the desired minute for the alarm and press the Tuning control knob to confirm the setting. The display will show the frequency options for the alarm. ‘Once’- the alarm will sound once ‘Weekdays’-the alarm will sound on weekdays only ‘Weekends’- the alarm will sound only at weekends ‘Daily’-the alarm will sound everyday Rotate the Tuning control knob to select your required frequency and press the Tuning control knob to confirm your setting. 5.
Contrast Headphone socket The contrast of the display can be adjusted. 1. Repeatedly pressing the Menu button until ‘Contrast’ is shown on the display. 2. Rotate the Tuning control knob to adjust the contrast. The contrast level indication on the screen will change at the same time. When you find the setting that gives the best legibility for the location in which the radio is used, press the Tuning control knob to save the setting. A 3.
Mute function Press the Mute button on the radio or the remote control,it will mute the output of the headphones. 1. Press the Mute button to mute the sound output. The mute symbol will show on the display. 2. Press the Mute button again or one of the Volume buttons to un-mute the sound output. The mute symbol will disappear on the display. Reset the radio If your radio fails to operate correctly or some digits on the display are missing or incomplete, please carry out the following procedure. 1.
Antenna system FM - Dipole type (supplied) AM - Loop type (supplied) Optical SPDIF output socket Coaxial SPDIF output socket Line Out socket Toslink RCA RCA Headphones socket 3.5 mm diameter stereo jack Output power 3mW+3mW (load 32 ohm) Dimension: 16.9” (L) x 10.7” (W) x 2.9” (H) Weight: 5.8 lbs GB Sangean reserves the right to amend the specification without notice.