Owners manual
11
GB
Software version / Setting up the tuning step
increment / 24 / 12 time format
Software version
The software display cannot be altered and is just for your
reference.
1. Make sure your radio is in power off mode.
2. Press and hold the Band/step button until the software version is
shown on the display (e.g. P0 X).
Setting up the tuning step increment
3. Continuing pressing and holding the Band / step button until you
hear a beep sound. Now the radio enters FM/AM step setting.
The screen will show FM tuning step (i.e. 50 or 100). Press the
Tuning up / down button to choose between 50KHZ or 100 KHZ
and then press the Band / step button to conrm the selection.
4. After the selection of FM tuning step, the display will show AM
tuning step (i.e. 9 or 10). Press the Tuning up / down to choose
between 9KHZ or 10 KHZ and then press the Band / step button
to conrm your selection.
24/12 time format
5. After the conrmation of AM tuning step, current 12/24 time format
will flash on the display. Press the Tuning up / down button to
selection your requested option. Then press the Band / step button
to conrm your selection.