Owners manual
12
Clock setting
1. Press and hold the clock set button until the radio beeps once and
the hour digits of time setting begins to ash.
2. Press the Tuning Up / Down button to adjust the hour setting as
required. Then press the clock set button to confirm the hour
setting. Now the minute digit of the setting will ash on the display.
3. Press the Tuning up / down button to adjust the minute setting as
required. Then press the clock set button to conrm the setting.
Your radio clock is now set.
Alarm setting
There are two different alarm modes in this unit. You can choose to
wake up to the radio or to a buzzer. You can set the alarm with the
radio on or off.
1. Press and hold the Alarm button until you hear a beep and see
one of these symbol or ashing on the display.
2. Now both the hour digit and alarm symbol will flash. Press the
Tuning up / down button to set the required hour. Press the Alarm
button again to conrm the setting.
3. Now the minute digit will flash on the display. Press the Tuning
up / down button to adjust the required minute. Press the Alarm
button again to conrm the minute setting. If you are setting the
radio alarm ( ), please go to step 5. Otherwise, please follow the
next step.