RCR-3 D Revision 1
Important safety instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed. 4. Follow all operations and use instructions. 5. Water and moisture: The appliance should not be used near water.
10. Power cords: The power cord should be positioned so it is not walked on, pinched, or items placed on top of it. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Unplug the power cord by gripping the power plug, not the cord. Operate the radio using only the current type of power source indicated. If you are not sure of the type of power supply to your home, consult your dealer or local power company. GB 11.
Europe version / Versión europa / Version européenne / Europäisches version / Europese versie 3
Controls 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Power button and Sleep timer Alarm 2 button Alarm 4 button Light button Time set button Date set button Alarm 1 button Alarm 3 button Nap button Tuning Up/Down and Snooze button SET and Light Saving Time button Station presets FM/AM/AUX band selection Clock LCD display Headphones socket Volume control Tone control Light level control Alarm sound level control Time zone switch Reset AUX-IN Power In GB 4
LCD display A B C D E F G H I J K L M N O 5 Radio band and clock AM/PM display Time indicator/Frequency Auto tuning indicator Memory and seconds indicator Daylight Saving Time indicator Time set indicator Nap indicator Sleep indicator and Snooze indicator Radio controlled time signal Minute indicator Alarm AM/PM indicator Date indicator Day of week indicator Month/Date/Year/alarm time indicator Alarm indicator
Operation Power On GB Automatic radio station presetting and clock setting 1. Connect the plug to a wall socket at the first time, the radio will automatically preset AM and FM stations. 7 highest frequency stations from both AM and FM. 2. Then your clock radio will display -:- and the indicator will flash on the display. The time will be set if the auto time set service is available. 3. When the radio is off, press and hold Time button for more than 4 seconds to receive Auto Time Set signal.
Manual date setting (only if automatic setting fails) 1. Press the DATE button then press SET button, the year digits will flash. 2. Press the TUNING up or down button to adjust the year. 3. Press the SET button again and the month digits will flash. 4. Press the TUNING up or down button to adjust the month. 5. Press the SET button again and the date digits will flash. 6. Press the TUNING up or down button to adjust the date. 7. Preset SET button to complete the time setting.
Radio operation Tuning into radio stations There are 3 ways of tuning your radio: A. Manual tuning 1. Press the Power button to turn on your radio. 2. Press the BAND button repeatedly to select AM (MW) or FM waveband. 3. Press the TUNING up or down button to change the frequency. 4. Press the Power button again to turn off your radio. GB B. Scan tuning 1. Press the Power button to turn on your radio. 2. Press the BAND button repeatedly to select AM (MW) or FM waveband. 3.
Alarm operation There are 4 alarms which can be set independently. Alarm 1 and Alarm 2 can be set to wake you by buzzer, and Alarm 3 and Alarm 4 can be set with radio alarm. When the alarm light is on, it means the indicated alarm will active in 24 hours. How to set Buzzer Alarm (Alarm 1 and Alarm 2) The buzzer beep increases in volume every 15 seconds. It beeps 1 minute, followed by 1 minute silence and repeat the cycle. The buzzer will beep for 1 hour, or stop by pressing the Power button.
How to set Radio Alarm (Alarm 3 and Alarm 4) The Radio Alarm will sound for 1 hour, or stop by pressing the Power button. The Radio Alarm volume may be adjusted through the Alarm sound level control button on the bottom of the radio. GB 1. Press the Alarm 3 (or Alarm 4) button and Alarm 3 time (or Alarm 4) time will show on the display. 2. Press the SET button, the alarm hour will show on the display. 3. Press TUNING up or down button to adjust the hour. 4.
Snooze function 1. To interrupt the alarm signal (radio alarm or buzzer alarm), press any button on the top side of the radio (up/ down/SET/ PRESET 1-7/band button). The alarm will stop for 5 minutes and the display will show . The snooze function can be repeat during the period of the alarm is active. 2. Press the Power button to cancel the snooze and alarm function. How to deactivate alarms 1. Press and continue to hold the Alarm 1 (or Alarm 2, 3, 4 button) that you wish to cancel for more than 2 seconds.
Sleep timer – radio auto shut off The Sleep timer can be set from 15-120 min. The radio will be switch off after the time you set has elapsed. GB 1. When the radio is off, press and continue to hold the button, the radio will be switched on and the display will show the timer minutes in turn, and release the button when the required time is appeared. Then the Sleep timer is set. 2. To cancel the Sleep timer, press the Power button and the symbol will be gone.
Headphone socket Plus in a headphone to the Headphone socket for headphone function, and the built-in radio speaker will be muted. AUX IN socket Plug in external audio devices such as CD player to the AUX IN socket (on the side of the radio), then play your device and press the Band button repeatedly until you see “AU” on the display. The radio will amplify and play out the signal form your device.
Technical data Power supply: 120 Volt/60 Hz (USA version/Australia version)/ ADAPTOR DC OUT 12V/0.7A; 230 Volt/50 Hz (Europe version)/ADAPTOR AC OUT 12V/0.6A GB Output power: 1.2 W (max) Power consumption: 7W (max)@120V, 8W (max)@230V Frequency coverage: FM 87.5 – 108.0 MHz AM 520 – 1710 kHz (USA version); AM 522 – 1629 kHz (Europe version) If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.
