RCR-2 GB Version 1
Important safety instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed. 4. Follow all operations and use instructions. 5. Water and Moisture: The appliance should not be used near water.
10. Power cords: The power cord should be positioned so it is not walked on, pinched, or items placed on top of it. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Unplug the power cord by gripping the power plug, not the cord. Operate the radio using only the correct type of power source indicated. If you are not sure of the type of power supply to your home, consult your dealer or local power company. GB 11.
Main features ( 1 ) 14 station memories ( 7 each on MW/FM bands ) ( 2 ) Digital radio controlled clock with date display Date and time displays are checked and if necessary corrected daily with an exact radio controlled time antenna signal ( 3 ) Nap timer Adjustable from 10-120 minutes ( 4 ) Alarm with Humane Wake System ( HWS ) The alarm begins quietly and gradually becomes louder before switched off ( buzzer alarm only ) ( 5 ) Radio alarm Woken up by the favorite station ( 6 ) Two independent alarm fu
GB 4
5
Controls Power on/off and Sleep timer 2 Nap timer 3 Display button to display time and radio frequency 4 Display backlight on/off button 5 Buzzer alarm level adjustment 6 RESET 7 Time zone adjustment 8 Date adjustment 9 Time adjustment 10 Alarm 2 button 11 Alarm 1 button 12 Headphones socket 13 Time/Date/Alarm set button 14 LCD display 15 Tuning Up/Down and Snooze button 16 Station memories and alarm week days selection 17 MW/FM band and alarm mode selection also Daylight Saving Time (D.S.T.) set .
LCD display A B C D E F G H I J K L M N 7 Radio band and a.m./p.m. display Time set Daylight Saving Time (D.S.T.) Alarm indicator Sleep timer Nap timer Alarm a.m./p.m.
Notes on safety Only operate this appliance with a power supply of 220-230 Volt/ 50-60 Hz . If you intend not using the appliance for a longer period of time ( eg. Holidays), pull the plug out of the mains socket to ensure a complete separation from the power supply. GB Protect the appliance from heat and moisture. Do not open the appliance and if it should require servicing, please refer to a licensed electrical workshop.
If the symbol blinks irregularly, try to improve the reception of the radio controlled time signal by re-allocating the radio, or rotate or extend the external antenna. If the time signal can not be received in your area, you will have to set the time and date manually. Note : To activate radio controlled time check manually, press Time button 9 for more than 4 seconds, the appliance will start to search radio controlled time signal.
DATE Press DATE button, display DATE will blink. Press SET button, display will blink year with a beep and a small Y (year) will appear, 1. Set the year with key + or -. 2. Press SET button again and follow the setting of year to set the month and date . 3. Confirm DATE setting by pressing DATE button again. GB Now the display will show time, date, week day, second and symbol . You can always adjust the time manually whenever is required by following above procedures.
Storing the preset stations Tune into the stations. Select a memory preset button and press for more than 2 seconds until a confirmed beep sounds and display M stops blinking. The station is now stored. Note: When you store a new station in a memory slot, the station previously in that slot is automatically erased. Recall the station memories Recall the station memories, simply select the required bands and press required station memory slot buttons 1-7.
Alarm with radio If you like to be awoken by the radio station you are listening, press Alarm system 1 or 2 for more than 2 seconds, the appliance will store the radio alarm station, then follow procedures 1-7 to set radio alarm. GB 1. Set the desired radio alarm volume. 2. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button. Display will blink selected alarm system symbol. 3. Press alarm SET button 13, display will blink both alarm hour and alarm mode with a beep. 4.
Alarm with HWS alarm buzzer 1. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button (11 or 10). Display will blink selected alarm system symbol. 2. Press alarm SET button 13, display will blink both alarm hour and alarm mode with a beep. 3. Press alarm mode button 17 to select alarm buzzer mode until display shows . 4. Press + or – to adjust required alarm hour then press SET button again, display minute digits will blink. Press + or – button to adjust required alarm minute. 5.
4. Press alarm 1 or 2 button again to confirm alarm cancellation. The symbol will stay on the display for around 2 seconds and disappear. Note: You may also select days of the week which you wish to be or not to GB be woken after pressing SET button while display is blinking days of the week. Press 1-7 ( Sunday – Saturday ) of button 16 for selection. Snooze To interrupt the alarm signal ( radio or beep tone/HWS), press the Snooze button 15. The alarm stops and begins again with interval of 5 minutes.
SLEEP – auto shut off Continuously pressing the Power button 1 will activate the sleep function, the radio will switch off automatically in 15 minutes step from 15-120. The Sleep control begins when you release the key and display will appear. After the minutes which selected, the radio turns itself off automatically. If you wish to turn off the radio beforehand, press Power on/off button 1. Headphones The radio provides a Headphones socket to connect the headphones set.
Time Zone switch In normal case, please set time zone switch to 0 position. For some countries where don’t provide radio controlled time facility but still can receive radio controlled time signal from nearby GB countries . If the time zone is different, you may use the time zone switch to correct the time.
Technical data Power supply 220-230 Volt/50-60 Hz Output Power 800 mW max Power consumption 7W (max.). Frequency coverage FM 87.50 - 108 .0 MHz MW 522 - 1629 kHz Technical data subject to changes without prior notice.