User manual

ManualsBrandsSANGEAN ManualsTunersRCR-22 CLOCK RADIO, Radio alarm clock, FM, AM, White, Silver

RCR-22

bands Digital Clock Radio instruction manual

Important safety instructions

Read and understand all safety and operating instructions before the radio is operated.

Retain instruction: The safety and operating instruction

s should be retained for future reference.

Heed warnings. All warnings on the appliance and operating instructions should be followed.

Follow all operations and use instructions.

Water and moisture: The appliance should not be used near water. Do not us

e near a bathtub, washbowl,

laundry tub, kitchen sink, wet basement, swimming pool, etc.

Unplug the radio from the AC power outlet before cleaning. Use only a damp cloth for cleaning the

exterior

of the radio.

Do not place the radio on an unstable cart, s

tand, bracket or table. The radio may fall, causing serious

personal injury and damage to the radio.

Ventilation: This radio should be situated so that its location or position does not

interfere

with its proper

ventilation. For example, the radio should

not be used on a bed, sofa, rug or other soft surfaces that may

block the ventilation openings. It should not be placed in a built

in situation like a

cabinet

that may reduce air

flow through the ventilation openings.

Power sources:

The radio should be op

erated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your home, consult your radio dealer or power

company.

10.

Power cords: The power cord should be positioned so it is not walked on, pin

ched, or items placed on top of

it. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the

unit. Unplug the power cord by gripping the power plug, not the cord. Operate the radio using only the

current t

ype of power source indicated. If you are not sure of the type of power supply to your home, consult

your dealer or local power company.

11.

Do not overload wall outlets or extension cords. This can result in a risk of fire or electrical shock. Never

insert o

bjects of any kind into the radio through opening. The objects may touch dangerous

voltage points or

short out parts. This could cause a fire or electrical shock.

12.

If the radio is left attended and unused for long periods of time, unplug it form the wall o

utlet. This will

prevent damage caused by lightning or power line surges.

13.

If the radio is left

unattended and unused for a long period of time, remove the batteries. The

batteries

may

leak and damage furniture of your radio.

14.

Do not attempt to service the

receiver yourself. Removing the cover may expose you to dangerous

voltage,

and will void the

warranty.

Refer all servicing to authorized service personnel.

15.

Object and Liquid Entry

Never push objects of any kind into this radio through opening as they ma

y touch

dangerous

voltage points or short

out parts that could result in a fire or electric shock. Never spill

liquid

any kind of product.

Summary of content (9 pages)

PAGE 1
RCR-22 AM/MW 2 bands Digital Clock Radio instruction manual Important safety instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed. 4. Follow all operations and use instructions. 5. Water and moisture: The appliance should not be used near water.
PAGE 2
16. The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged. B. Objects have fallen or liquid had been spilled into the radio. C. The radio has been exposed to rain or water. D. The radio does not appear to operate normally or exhibits a marked change in performance. E. The radio has been dropped, or the enclosure damaged. Controls 1. Time/Date/Alarm set button; Daylight Saving Time (D.S.T.) set. 2.
PAGE 3
7. Time button, auto time set enforcement 8. Alarm 2 button 9. Alarm 1 button 10. Power button and Sleep timer 11. Nap button 12. Display button 13. Light button 14. LCD display 15. Time zone switch 16. Reset button 17. Light level control 18. Alarm sound level control 19. AUX-IN 20. Headphones socket 21. Volume control LCD display A. Radio band and clock AM/PM display B. Daylight Saving Time indicator C. Time set indicator D. Nap indicator E. Sleep indicator and Snooze indicator F.
PAGE 4
M. Memory and seconds indicator N. Alarm AM/PM indicator O. Alarm indicator Operation Clock Automatic clock setting 1. Connect the plug to a wall socket, and your clock radio will display -:- and the indicator will flash on the display. 2. When the radio is off, press and hold Time button for more than 4 seconds to receive Auto Time Set signal. Manual clock setting (only if automatic setting fails) 1. Press the TIME button, and the display will show . 2.
PAGE 5
Change 12/24 hour clock format 1. Press TIME button, and then press SET button. 2. To set 12 hour clock format, press Station preset 1, or, to set 24 hours clock format, press Station preset 2. 3. Press Power button to finish the setting. D.S.T. (Daylight Saving Time) 1. When the display shows the time, press the SET button for more than 4 seconds to set the clock 1 hour faster, and the display will show . 2. To set the clock back from D.S.T.
PAGE 6
3. Tune into the station that you would like to preset. 4. There are 7 preset buttons from 1 to 7. Press 1 of them and hold for more than 2 seconds until the radio beeps, and the station frequency will be saved into the chosen preset. 5. Repeat the procedure for the remaining presets. Your radio has 7 presets for each AM and FM. 6. The preset can be overwritten by following the above procedure. Recalling stations: 1. Press the BAND button for AM or FM. 2.
PAGE 7
The radio alarm will sound for 1 hour, or stop by pressing the Power button. 1. Press the Alarm 1 (or Alarm 2) button and Alarm 1 time (or Alarm 2) time will show on the display. 2. Press the SET button, the alarm hour will show on the display. 3. Press up or down button to adjust the hour. 4. Press the SET button again and adjust the minute by pressing up or down button. 5. Select required days of week on which the alarm will beep by pressing day of week buttons. 6.
PAGE 8
Nap timer 4. It is a countdown alarm which will sound after the time period that you set. And the time period can be set from 10 to 120 minutes in 10 minutes steps. 5. Press the NAP button until the required time period is shown on the display. 6. The word NAP will be shown on the display and the Nap timer is set. 7. While the Nap timer is alarming, press the Power button to silence the alarm. 8.
PAGE 9
When the radio is on, you can switch the display between station frequency and time by pressing the DISPLAY button. Display backlight adjustment Press the button to switch the display backlight to be brighter or darker. When it is switched to darker, you can turn the button 17 (on the back of the radio) to adjust the display light to be the most dark. Headphone socket Plus in a headphone to the Headphone socket for headphone function, and the built-in radio speaker will be muted.