Operating instructions

RECALL A STATION

To recall a preset station, simply press the BAND button to select AM or FM,

press P1/P2 to select the page then press the desired Preset button.

SETTING THE CLOCK AND ALARMS

You must press the TIME SET button on the back of the RS-330 before you

can set the clock or the alarm times. (When you plug the clock radio in for the

first time, the display will show 12:00.)

Pressing TIME SET cycles through the settings in this order: clock → Alarm 1 →

Alarm 2 → clock, and so forth. You can set the clock or alarms in any order.

When you have finished, do not press TIME SET again. Simply wait a few

seconds for the RS-330 to return to normal operation.

To set the clock, press the TIME SET button on the rear of the unit once. The

clock display blinks to show that the clock is ready to be set. Press TUNE/TIME

buttons to change the display to show the correct time. Pressing the (∧)

button will increase the time and (∨) will decrease it. Note that 12:00 AM is

midnight, and 12:00 PM is noon.

Press TIME SET button twice and the 6:00 AM “start” alarm time will flash.

Press TUNE/TIME buttons to select the time for Alarm 1. After seven seconds

the display will stop flashing and the ALARM 1 icon will appear indicating Alarm 1

is set.

To set Alarm 2 press TIME SET button three times. ALARM 2 icon will be

displayed and 7:00 AM will be the “start” setting. Follow the same procedure as

for setting Alarm 1.

UNDERSTANDING THE ALARM SYSTEM

The RS-330’s dual-alarm system is unique. Wake-up time, wake-up mode, and

wake-up volume can be set independently for two people. Operation is therefore

slightly different from other clock radios. When the RS-330 is used alone, both

Alarm 1 and Alarm 2 functions occur through the RS-330.

The most important difference is that the RS-330 and RS-332 operate indepen-

dently during wake up. Radio sound (or the beeper) is channeled to the RS-330

for Alarm 1 and to the RS-332 for Alarm 2. This feature keeps Alarm 1 from

disturbing the sleeper waiting for Alarm 2. The radio also switches to mono

reception for the activated alarm.

RS-330_381B101A.p65 2003/6/18, 下午 02:24Page 9 Adobe PageMaker 6.5C/Win