User Manual

5
Power the radio
1. Installing the batteries, rst turn battery cover xture anti-clockwise
to loosen and pull down the battery cover.
Note:
Before you insert the batteries, if you use non-rechargeable batter-
ies, make sure the Charger/Batteries switch which located inside
the battery compartment is switched to Batteries position.
If you use rechargeable batteries, make sure to switch Charger/
Batteries switch to Charger position.
2. Insert 4 X C size (UM-2) battery into the compartment. Ensure
the battery is inserted in accordance with the diagram shown.
Close the battery cover and fasten the xture by turning clockwise.
If the radio is not to be used for any extended period of time, it is
recommended that the battery is removed from the radio.
Reduced power, distortion and a “ stuttering sound “ or low battery
sign is ashing on the display are all signs that the batteries
need replacing or recharged. (see below charge the batteries)