Operation Manual
42
GB
Playing les from USB memory devices
1. Carefully insert the USB memory device into the USB slot. Press the
Standby button to switch on the radio. The radio may detect the
memory has been connected in which case it will ask whether you
wish to open the folder view of the memory contents.Press the
Tuning Control Rotary to select ‘Yes’ and skip to step 4 below.
If the USB memory was not automatically detected, proceed as
follows.
2. To select USB playback mode press the Mode button and rotate the
Tuning control Rotary as needed until Music Player mode is selected.
Press the Tuning Control Rotary to select the option.
3. Rotate the Tuning Control Rotary until ‘USB playback’ is highlighted
on the display and press the control. Your radio will now list the
content stored on the USB memory device. If there are many les or
folders this may take a few seconds.
4. Rotate the Tuning Control Rotary to highlight the required folder
and press the control to enter the current folder. The list of tracks in
the current folder will be displayed. Alternatively, if you have nested
folders (such as album folders within an artist folder) then you will
simply step to the next folder level.
5. Rotate the Tuning Control Rotary to select the track and press
the control to begin playing from the highlighted track. All files
in the current folder will then be played in turn. Files are played
in the order in which they exist in the filing system of the USB
memory (they are not sorted by le name or track number).
6. Controlling playback from the USB memory device including shufe
and Repeat functions is explained in the section of Music player.
Inserting and removing memory devices
1. Plug the USB memory devices into the rectangular slot on the rear of
the unit.
2. To select USB mode press the Mode button and rotate the Tuning
control Rotary until the Music Player mode is shown on the display.
Press the Tuning Control Rotary to select the option.