Operation Manual

73
Brightness control
The brightness of the display can be adjusted for when the radio is in standby and for when it is
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a
higher brightness setting.
1. Press the Standby button to switch on your radio. Access the menu for the current mode by
pressing the Menu button.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu. Rotate the Tuning Control Rotary
until 'Brightness' is highlighted on the display. Press the Tuning Control Rotary to conrm the
setting.
3. In brightness menu, there are 3 settings:
Time out:to adjust the length of time before the backlight turns off.
On level: to adjust the the brightness when the radio is in use.
Dime level: to adjust the brightness when the radio is in stanby. Rotate the Tuning Control
Rotary to select your option and press the Tuning Control Rotary to conrm your setting.
Language selection
By default your radio will display all menus and messages in English. You can choose your
preferred language.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary until 'System settings' is highlighted on the display. Press the Tuning Control Rotary
to enter the settings menu.
2. Rotate the Tuning Control Rotary until 'Language' is highlighted on the display. Press the
Tuning Control Rotary to enter the menu.
3. Rotate the Tuning Control Rotary until your preferred language is highlighted and press
the Tuning Control Rotary to conrm the setting.
FM
Aux in
Sleep
Alarms
System settings
Main menu
>
Timeout
On level
Dim level
Backlight
>
>
>
Brightness
Contrast
Equaliser
Network
Time/Date
System settings
>
>
>
Inactive Standby
Language
Factory Reset
Software update
Setup wizard
System settings
>
>
English
French
German
Italian
Danish
Language