WFT-2D GB Version 1
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Contents Introduction ...................................................................3-10 Before you can use this product ........................................3 Controls and connections ..............................................4-5 Remote control battery operation ...................................6-7 Navigation controls .......................................................8-10 Network configuration ................................................
Before you can use this product Introduction Before you can use your radio, you must have the following: ● A broadband Internet connection (not required for DAB, FM or Music Player functions). ● A wireless access point (WiFi) or a wired Ethernet connection connected to your broadband Internet Service Provider, preferably via a router. In many cases the broadband modem, router and wireless access point will be a single combined unit supplied by your Internet Service Provider or bought from a computer store.
Controls and connections (Front view) GB 1. Headphone socket 2. USB socket 3. LCD display 4. Light sensor 5. Remote control sensor 6. VFD display 7.
Controls and connections (Rear View) 8. Wi-Fi antenna 9. Telescopic antenna 10. Ethernet socket (RJ-45) 11. Optical SPDIF output 12. Coaxial SPDIF output 13. Line-out socket 14.
Controls and connections-cont. Remote control handset A. On/ Standby button Aa. Back button Ab. Key pad buttons 1-10/0 Ac. Directory button Ad. Add favorite button Ae. Recall favorite station button B. Recall preset station button C. INFO button D. Up button E. Menu button F. Tuning down button G. Play/ Pause H. Down button I. Prev/ Next button (Fast-forward/ Rewind button) J. Sleep button K. Repeat button L. FM button M. DAB button N. Snooze button O. Aux in button (no function available) P.
Using the touch screen The WFT-2D internet radio has a high resolution color display with touch sensitive controls. When using the internet radio, the display shows only the controls that are needed at each stage of its operation. To operate the controls simply touch the button area with the tip of a finger for about half a second until the command has been accepted. You may find that at first, the internet radio does not always detect that you have touched a button.
Navigation controls on the touch screen This section describes the basic means of controlling your WFT-2D internet radio. Instructions for each operating mode are given in the later sections of this book. 1. Pressing the On/Standby control brings your radio out of Standby mode. Pressing the On/Standby control while the radio is in use will cause it to return to the Standby mode with the clock display. GB 2.
7. Touch the Close button to exit the current mode. The display will return to the home menu screen. X 8. Touch the Volume button and then use the + or - buttons on the screen or use the Rotary Volume control until your required volume level is reached. 9. Your internet radio has a Play mode idle screen which displays the time and date with information relevant to the operating mode but without the control buttons being visible.
Text entry screens To enter text when in a text entry screen use the procedure below to navigate and select required text. Setup Wizard A To enter the text touch the required character on the display to cause the character to be entered. Network key: 123 - JONES I Q W A E S Z To enter UPPERCASE characters touch the arrow on the left hand side of the screen until the arrow appears yellow. The next character will be entered as uppercase. R D X T F C Y G Q U H B I J O K P GB L N M .
Configuration Connecting your internet radio to your computer network 1. Place your internet radio on a flat surface. 2. If you wish to use a wired network connection, plug the Ethernet cable into the RJ-45 socket (marked LAN) at the back of the radio. 3. Plug the mains lead into the mains socket located at the back of your radio ensuring that the plug is pushed fully into the socket. 4. Plug the other end of the mains lead into a wall socket and switch on the wall socket.
Connecting to your computer network-cont. Touch the Internet option for the clock synchronization. The clock can also be updated from DAB or the FM radio, from the Network, or not automatically updated. If you choose any option, other than internet go to step 11. Otherwise you will first need to select the correct time zone and daylight savings setting, see steps 9 and 10. If you choose None you will need to set the clock manually, see section ‘Manually setting the clock.
Connecting to your computer network-cont. If your network allows automatic configuration (which is normal) the radio will acquire a network address. The screen should say ‘Connecting,’ and then ‘Setup Wizard completed.’ Touch OK to exit the setup wizard, the radio will enter Standby mode. You can then skip to step 20 . 15:09 23 Jun 2010 Setup wizard completed. There are two indicator lights incorporated into the RJ-45 connector.
Connecting to your computer network- cont. 15. If your network is not found, it may be because the router is configured not to broadcast the SSID. You should then scroll through the menu and select Manual settings option in order to enter the network details manually. This is described in ‘Manual Network Configuration’.
Connecting to your computer network- cont. WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Press the '123' button, then press again when it shows 'hex'. This provides a simplified keyboard layout for the WEP key entry. Some wireless routers can also use pass-phrases for WEP but these are not supported. WPA keys are usually set up using a pass-phrase of between 8 and 63 characters. Your radio accepts pass-phrases for WPA keys. 19. To enter the WEP or WPA key, characters see page 11.
Changing the network connection In the sections above, you choose how your radio would be connected to your network, either using a WiFi connection or using a wired Ethernet cable. From time to time, you may find that you need to connect to different computer networks. The Internet setup menu allows you to change your radios network settings, scan for an alternative wireless network, or to manually configure the network parameters.
Manual network configuration If you do not wish to use DHCP for automatic configuration, or if your network is configured with a hidden SSID, then you will need to enter some network settings manually. (Note - a hidden SSID may prevent casual observers from detecting your network, but it is not recommended as a means of network security.) 15:05 26 Jun 2010 Network Wizard Paul’s network 1. From the radios 'Settings'>'Network settings' menu, touch Manual settings.
Manual network configuration - cont. 5. In most installations the DNS settings (DNS = Domain Name System) will be set to the same IP address as your router (192.168.1.1 in the example shown). In this case the secondary DNS may be left at zero. Text entry is described in previous section ‘Text entry screens’. Touch the tick symbol to confirm. If you previously specified 'Wired' and then 'DHCP No', your radio should now connect to the router using the Ethernet cable (in which case skip to step 11).
Manual network configuration - cont. 9. WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting should match that used by your router. Some routers allow both to be specified, and the router will use whichever variant is supported by the connected device.
Internet Radio Internet Radio - the basics Before you can use your internet radio to listen to broadcasts via the Internet, it is necessary to have connected it to your computer network using either the wireless (WiFi) connection or the wired Ethernet connection (RJ-45 socket) located on the back of the unit. GB There are literally many thousands of radio broadcasts available via the Internet as well as 'Podcasts'.
If your radio cannot connect to a radio station Note: If your radio is unable to connect to an internet radio station it will generally either display 'Network Error' or 'Stopped'. This can be for many reasons, but typically will be due to one of the following: The radio station may not be broadcasting at the present time. The radio station may not be able to accommodate any more connections from internet listeners. The broadcaster may limit listening to specific countries or regions.
Internet Radio From the home menu touch the Internet Radio mode button. Directory-In play mode touch to return to the station list. GB Information-Touch to view detailed information for a station currently being played. Add Favorite-Touch to add the currently tuned radio station to the favorites list. Rewind-Touch to rewind previously broadcast material and podcasts. (Not applicable to all programmes/podcasts). Fast-forward-Touch to fast-forward previously broadcast material and podcasts.
Selecting a radio station by location Internet Radio Touch the Internet Radio menu bar once or twice to enter the Internet radio menu list. 15:05 Browse station list Return to playing screen Touch Browse station list and select Stations to enter stations menu. Note: that the menu may offer one or more local selections based upon the country in which the unit is being used, according to your internet IP address ('United Kingdom' and 'BBC' stations, for example).
Selecting a radio station by genre Follow the same procedure on the proceeding page to select a radio station by genre. Select Genre instead of Location and then select the desired Genre. 15:05 26 Jun 2010 Stations Location Searching for a radio station by name Genre GB There may be occasions when you know the name of a radio station but you do not know the location or genre. This facility allows you to search for the station using a part (or parts) of the radio station name.
Selecting a New or Popular station As described in the section 'Internet Radio - the basics', your radio connects via the Internet to a database of radio stations. This option is provided to highlight stations which are newly added to the list of those available, or stations which are particularly popular with listeners around the world. Your radio allows you to easily choose stations from these two categories, using menus similar to those used when finding stations by location and genre.
Selecting a podcast / BBC Listen Again Internet Radio Some radio stations allow you to listen to programmes that have already been broadcast. The BBC's Listen Again service is an example of this. In addition, radio broadcasters and individuals may make programmes which are intended normally to be downloaded into a computer or copied onto a portable media player. These are commonly known as Podcasts.
Customising your radio Your radio allows you to create customized lists of stations which can appear in two special menus on the radio called ‘My Favorites’ and ‘My Added Stations.’ Your radio uses a database which is accessed via the Internet in order to find out which radio stations are available and how it should connect to them. You are able to add your personals selections to this database. These will only be accessible by you using your PC or your radio.
Customising your radio - cont. Configuring My Favorite Stations 1. Using the web site at http://www.wifiradio-frontier.com it is possible to search among the many radio stations that are available by location, genre, or language. You may also choose from new or popular stations. 2. When the radio stations that you have found are shown on your computer screen, they are shown with a 'Play' icon and an 'Add to favorites' icon (the plus symbol and heart).
To add favorite stations Tune to the required radio station as previously described. To store the favorite station touch the Add to favorite button. ’Favorite added’ will show on the display. Repeat this procedure as needed for the remaining favorites. 15:05 My Favourites Local United Kingdom Selecting your favorite stations Internet Radio Touch the Internet Radio menu bar once or twice to enter the Internet radio menu list. Touch Browse station list and then select My favorites.
Selecting your added stations Internet Radio Touch the Internet Radio menu bar once or twice to enter the Internet radio menu list. 15:05 Stations Touch Browse station list and scroll down and select My Added Stations. Podcasts In addition, it is possible to specify audio streams for 'My added stations' which are not compatible with your radio. In this event the station will not be playable. The Sangean WFT-2D can only play MP3, WMA, FLAC, AAC and Real Audio streams.
Music Player From the home menu select the My Music mode button. Directory-In play mode touch to return to the music list. Information-Touch to view detailed information for a track currently being played. 15:05 26 Jun 2010 Now playing 1 of 645 Invisible Limits Tangerine Dream Stratosfear Skip/Rewind-Touch to skip current track. The previous track in the list will be played. Press and hold to advance forward speed. Skip/Fast-forward-Touch to skip current track. The next track in the list will be played.
Music Player Use with Windows, Apple Mac, Linux, USB memory The Music Player allows you to play audio files which are stored on a computer on your network or on a USB memory device plugged into the radio. In order to play files from a computer on your network, your radio must connect to a file server application which uses the Universal Plug and Play (UPnP) protocol. If your computer uses Windows 7, Vista or XP, then it is likely that your computer already has a UPnP server application available.
Accessing your audio files via a UPnP server If your computer is running Windows 7, then Windows Media Player version 12 includes a UPnP server which will make your files available to your radio. If you have Windows Vista or XP please see the later section of ‘Accessing your radio audio files via a UPnP server using Windows Vista and XP’. There are other UPnP server solutions available for non-Windows users and for Windows users who may wish to use an alternative (see the preceding page).
Set up UPnP access on a Windows PC-cont. 4. Touch Shared Media. The radio will scan for all available UPnP servers. It may take a few seconds for the radio to complete its scan. The radio will display 'No UPnP service' if no UPnP servers are found. 5. After scanning, select your UPnP server. If you allowed automatic connection previously, your radio should now connect and you may skip to the next page.
Locating and playing media files using UPnP Once the UPnP server has been configured to share media files with your radio, you may select the files that you wish to play as follows:- 15:05 26 Jun 2010 Shared Media JENNY: Jenny’s music From the home menu select My Music mode button, HOME_PC: Mums music Select Shared Media to cause the radio to scan for UPnP servers. Note: that it may take a few seconds for the radio to complete its scan.
Media selection When searching via UPnP you will have a selection of search criteria as determined by the UPnP server software on your computer. This allows you to search by a given information type (Album, Artist, Genre, etc.) and then to narrow the search to an album or to a particular track within an album. 15:05 26 Jun 2010 Music All Music Genre GB All Artists Some UPnP server applications allow the search options to be customised.
Listening to a particular track If you wish to play a particular track from an album or folder, first choose the album or folder as described on the preceding pages. Use the scroll bar until the required track is shown. Select the chosen track, the track will begin playing. The radio will then play subsequent tracks from the same album or folder.
Controlling playback cont. Repeat tracks When the music track is playing select the Repeat button, repeat will appear in yellow and your selected tracks will be played repeatedly. Touch the Repeat button again to turn off the repeat function. The Repeat button will return to white. My Music Alternatively touch the My Music menu bar once or twice to enter the music menu list. Touch Repeat until ‘On’ appears in yellow and your selected tracks will be played repeatedly.
Display mode When playing a track in Music Player mode the display typically shows Artist, Album and track name. Depending on the media and the server,album art may also be displayed. Touch the Information button to view additional information. 15:05 26 Jun 2010 Invisible Limits Bit rate 192 kb/s Codes WMA Sampling rate 44.1 kHz Note: That the availability of information depends on the specific media files, their format and upon the server capability.
Using USB memory devices This section describes how to use your radio to access and playback your audio files via USB memory devices. USB memory devices plug into the rectangular slot located beneath the touch screen. Important: Your radio is only designed to work with USB flash memory devices. It is not intended to be connected to hard disk drives or any other type of USB device. GB The WFT-2D radio has been tested with a range of USB memory devices of up to 64GB capacity.
Playing files from USB memory devices Carefully insert the USB memory device into the USB slot. Press the On/Standby control to switch on the radio. The radio may detect that the memory has been connected, in which case it will ask whether you wish to open the folder view of the memory contents. Touch Yes . If the USB memory was not automatically detected, proceed as follows.
Playlists Sometimes you may wish to set up a list of music tracks or albums which can then be played without further action - as background music for a party, for example. Your radio can be configured to hold a queue of up to 500 tracks in a playlist menu. The tracks or albums for the playlist can be selected from your UPnP server and from a USB memory device. The playlist is held in memory in your radio until external power is removed, or until the playlist is cleared from the menu.
Viewing My playlist When playing a track touch the Directory button to enter the media selection menu. 15:05 Shared Media Repeatedly touch the Back button to return to the ‘Select Music Source’ menu. USB Playback Touch My Playlist to see all of the tracks previously added. You may use the arrows and scroll bar to scroll through the playlist. My Playlist 15:05 Tracks which are served via UPnP will show their track name and USB tracks will show their file name.
Clearing the Playlist My Music Touch the My Music menu bar to enter the music menu list. 15:05 26 Jun 2010 Touch Clear My Playlist, you will be asked to confirm deletion. To cause the whole playlist to be deleted touch Yes. Repeat OFF Shuffle ON If you do not wish to clear the playlist touch No to cancel the operation. Add to My Playlist Playing your playlist GB Clear My Playlist My Music When playing a track touch the Directory button to enter the media selection menu.
DAB Radio In DAB radio mode you can listen to conventional radio broadcasts, scan for new radio stations, manually tune stations and view station information. Carefully extend the telescopic aerial. 15:05 26 Jun 2010 STEREO Signal: BBC Radio 1 Pop Music On air now: Greg James From the home menu press the DAB Radio mode button. Directory-In playmode touch to select the list of DAB radio stations. Add Favorite-Touch to Add the currently tuned radio station to the favorite list.
Using the DAB mode for this first time-DAB If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will be carried out. The display will show ‘Scanning in progress.’ (If the radio has been used before the last used station will be selected instead). 15:05 26 Jun 2010 Scanning in progress... During the scanning process, as new stations are detected the station counter will be increase and the stations will be added to the list which is stored in the radio.
Selecting a DAB radio station When playing a DAB radio station, the display normally shows the name of the current station with other related information. When playing a radio station touch the Directory button to access the list of DAB radio stations. Use the scroll bar and select desired station that you wish to tune to. The radio will retune to the selected station. Use the volume control to set the sound level as needed.
Display information-DAB When playing a DAB radio station, the display shows the station name and DLS information broadcast giving real time information such as programme name, track title and contact details. 15:05 26 Jun 2010 STEREO Signal: BBC Radio 1 Touch to view a detailed information screen displaying information such as station ensemble, Frequency, error rate, signal strength, codec, but rate and sampling rate.
Manual Tuning Manual tuning allows you to tune directly to the various Band III DAB channels (5A to 13F). DAB 15:05 Scan Touch the DAB menu bar once or twice to enter the DAB menu list. Edit favourites Select Manual tune and use the scroll bar to scroll through to choose the required DAB channel. Touch the desired DAB channel to cause the radio to tune to the chosen channel. When the radio has tuned, the display shows the channel number and frequency, and the name of the DAB multiplex found (if any).
My favorites-DAB There are 10 favorite station presets for DAB radio. Note: favorite stations are retained in memory when the radio is switched off and disconnected from the mains. Favorites 1-5 may be accessed using the numbered buttons on the remote control. Tune to the required radio station as previously described. To store the favorite station touch the ADD to favorite button. ‘Favorite added’ will show on the display. Repeat this procedure as needed for the remaining presets.
Dynamic Range Control settings Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment by reducing the dynamic range of the audio signal. From the DAB menu list select DRC to enter the DRC adjustment mode. The current DRC setting will be highlighted on the screen. 15:05 Scan Edit favourites DRC 15:05 DRC Touch the required DRC setting the display will return to the previous screen.
FM Radio In FM radio mode your radio can find stations automatically using the autoscan feature or you can manually tune to a station. You can store your favorite stations and select either mono or stereo mode for the station that you are listening to. Carefully extend the telescopic aerial. 15:05 26 Jun 2010 STEREO Signal: 87.50MHz 88 90 GB 94 98 103 106 108 From the home menu touch the FM Radio mode button.
Auto scanning – FM Auto Scan Touch the Auto Scan button until Auto Tune appears in yellow. Touch the Left or Right buttons to cause the radio to scan to find a station. It will stop scanning when it finds a radio station of sufficient strength. When the end of the waveband is reached the radio will recommence tuning from the opposite end of the waveband. 15:05 26 Jun 2010 STEREO Signal: 87.50MHz 88 90 The display will show the frequency of the signal which has been found.
My Favorites- FM There are 10 favorite station presets for FM radio. Note that favorite stations are retained in memory when the radio is switched off and disconnected from the mains. Favorites 1-5 may be accessed using the numbered buttons on the remote control. Tune to the required radio station as previously described. To store the favorite station touch the Add to favorite button.‘Favorite added’ will show on the display. Repeat this procedure as needed for the remaining presets.
Scan setting-FM When using the FM mode your radio can be set either to scan local stations or to scan all stations including distant radio stations. From the FM Menu list touch Stop on stations. The current setting will be displayed in yellow. To set your radio so that only the stations with the strongest signals are found during scanning touch Stop on stations until 'Strong' appears on the display. (Normally this will restrict scanning to local transmissions).
Clock and Alarms Automatically updating the clock Your radio will normally update the clock automatically when connected to the internet. 15:05 26 Jun 2010 Settings Menu Time settings You may wish to use the radio away from the internet, in which case you may specify that the unit sets its clock from DAB or FM radio broadcasts. After a power failure the radio will then set its clock the next time that you turn on the radio in DAB or FM mode.
Setting the clock format The clock display used in standby mode and on the playing mode screens can be set to 12 or 24 hour format. The selected format is then also used when setting the alarms. 15:05 26 Jun 2010 Settings Menu Time settings Access the main Settings menu. Touch Time Settings and scroll down until the current clock format is displayed. The current time format will appear in yellow. Touch Time format to select either 12 or 24 hour format.
Manually setting the date To set the correct date follow procedure for setting the clock on the previous page. Select the Date option on the display. Manually setting the date will cause the Time Source setting to be set to 'None'. 15:05 26 Jun 2010 Time Manual Setup Time Date GB Setting the time zone From the Time Settings menu, touch Time Zone. Select the correct time zone which is applicable to your location.
Setting the alarm clock Your radio has two separate alarms which can be set to wake you to either the radio, iPod or a buzzer alarm. In the event of a power interruption your radio has built in memory that will retain your alarm settings. Ensure that the time is set correctly before setting the alarms.
Setting the alarm clock cont. Use the Up and Down arrows to set the time and date option. 15:05 26 Jun 2010 Set alarm time Touch the + and – buttons to adjust the alarm volume. 09 Note: If you make a mistake at any point while setting the alarms or wish to return to the previous screen touch the Back button.
Editing alarms when in standby When in standby touching the alarm button will enter the alarm setup menu. Follow the procedure on the proceeding pages to edit the alarms. Auto Scan Snooze timer The buzzer, iPod or radio alarm can be silenced for a selected number of minutes by touching Snooze on the display. The Snooze duration can be adjusted between 5 and 30 minutes in 5 minute increments. The default setting is 5 minutes.
Sleep timer Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be adjusted between 15 and 90 minutes in 15 minute increments. From the home menu press the Settings mode button. The main settings menu will be displayed. Scroll through the menu and touch Miscellaneous settings. 15:05 26 Jun 2010 90 Miscellaneous Settings Language English Alarm snooze 5 mins Idle timeout 5 mins Sleep GB 90mins Select Sleep.
Idle time out Your radio has a play mode idle screen which displays the time and date with information relevant to the operating mode but without the control buttons being visible. The Idle time out setting can be adjusted between 1, 2, 3, 5, 10 minute increments or set to never time out. 15:05 26 Jun 2010 Miscellaneous Settings Language From the home menu select the Settings mode button. The main settings menu will be displayed.
Display and Audio Equaliser function The sound on your radio can be adjusted to suit your personal taste for the material that you are listening to. The WFT-2D has a range of equaliser modes. Alternatively you may set the treble and bass levels to your own preferences which can be accessed from the 'Custom' settings menu item. 15:05 Time settings Scroll through the menu and select the required Equaliser setting.
Setting up your Custom EQ profile and Audio If you find the preset equaliser functions not to your liking, you may set up a custom treble and bass setting as follows: 15:05 26 Jun 2010 Settings Menu Time settings From the home menu press the Settings mode button. The main settings menu will be displayed. Alarm settings Equaliser settings Network settings Select Equaliser settings. The current setting will appear in yellow. Scroll through the menu and select Custom.
Brightness control The brightness of the display can be adjusted for when the radio is in Standby and for when it is in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting. From the home menu press the Settings mode button. The main settings menu will be displayed. Scroll through the menu and select Miscellaneous Settings and select Display backlight.
Standby backlight off Your radio has a 'Standby backlight off' setting which can be set to switch the backlight off when the radio is in Standby. The time out setting can be adjusted between 1 and 30 minutes or set to never switch backlight off. 15:05 Sleep Standby Backlight Off From the home menu select the Settings mode button. The main settings menu will be displayed. Select Miscellaneous Settings and select Standby backlight Off. Select the desired number of minutes.
Headphone socket A 3.5mm Headphone Socket located on the front of your radio is provided to use with headphones. Please be aware that the sensitivity of headphones can vary widely. We therefore recommend setting volume to a low level before connecting headphones to the radio. It is also recommended to reduce the volume before unplugging your headphones. GB Important: Excessive sound pressure from earphones and headphones can cause hearing loss.
Optical and Coaxial S/PIDF output socket Two digital output sockets providing an S/PDIF signal is provided on the rear of your radio for connection to an amplifier, mini-disc or other equipment with a digital optical input. Line out socket (3.5mm Jack) A pair of Line Out socket located on the rear of your radio is provided for connection the audio signal to an externel amplifier. Set the volume control on the radio to minimum if desired.
Information Factory reset If you wish to completely reset your radio to its initial state this may be performed by following this procedure. By performing a factory reset, all user entered settings will be erased. From the home menu press the Settings mode button. The main settings menu will be displayed. 15:05 26 Jun 2010 Miscellaneous settings Check for updates GB Display backlight Software version Select Miscellaneous settings. Select Factory reset and then touch Yes to proceed.
Software update From time to time, new software features for your radio may be developed. Your radio has therefore been designed to allow its internal software to be updated using your Internet connection. You should not attempt to update your radio unless it is recommended to you by Roberts Customer Services. Updating the software may remove all network settings, radio station presets and alarm settings from your radio.
Network profiles Each time that you connect your radio to a WiFi network, the radio will store the details of that connection (SSID, security key, DHCP/IP address settings) as a profile. Up to four such profiles are stored in the radio so that if the unit is used in multiple locations there is no need to enter the network settings when returning to a location previously visited. The radio stores the four most recent profiles in memory identified by their SSID.
Software version display The software version display is provided for reference and customer support purposes and cannot be changed. 15:05 Check for Updates Display backlight From the home menu press the Settings mode button. The main settings menu will be displayed. Software version 15:05 Select Miscellaneous Settings. 26 Jun 2010 Miscellaneous Settings 26 Jun 2010 Software version Settings Ir-mmi-FS2028-0000-0003-ColourStr eam-V3.0.21.33659pl-187-4dB Touch Software version.
Accessing your radio audio files via a UPnP server using Windows Vista and XP If your computer is running Windows Vista or XP, then Windows Media Player version 11 includes a UPnP server which will make your files available to your radio. There are other UPnP server solutions available for non-Windows users and for Windows users who may wish to use an alternative (see the preceding page). GB It is beyond the scope of this instruction book to cover all possible options for UPnP.
Set up UPnP access on a Windows PC - cont. Touch Shared media. The radio will scan for all available UPnP servers. It may take a few seconds for the radio to complete its scan. The radio will display 'No UPnP service' if no UPnP servers are found. 15:05 26 Jun 2010 Shared Media JENNY: Jenny’s music 4. After scanning, select your UPnP server. If you are using WMP 11 as the server, your radio will then normally display 'Unauthorised ' at this stage. 5.
Audio codecs Your radio supports a range of audio codecs which provide compatibility with a wide range of Internet Radio stations. These also allow users to stream music from their computers or to play directly from USB fl ash memory devices. Note that for any given audio codec, there are many streaming protocols available, and thus even if an Internet Radio station uses a supported format, this does not guarantee that every such station will work with your radio.
Demonstration mode Your radio has an in-store demonstration mode. Normally, this mode is disabled, but may be enabled as follows. At the home screen slide your finger left to right along the top edge of the display and then down the right-hand side in one continuous motion. Repeat the same motion to return the radio to normal operation. 1 5 :0 5 2 6 J un 2 0 1 0 http:// DAB Radio FM Radio Internet Radio Last.
Cautions Do not allow your radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage. The name plate is located on the rear of the radio. ● The radio shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the radio. ● It is recommended to operate the product such that there is a minimum distance (10cm recommended) to adjacent objects in order to ensure good ventilation.
Specifications Circuit features Power Requirements Mains Aerial System AC100-240 V/ 50-60 Hz WiFi antenna DAB / DAB+ Telescopic aerial FM Telescopic aerial Remote control battery 2X AAA Headphone socket 3.5 mm diameter Connectivity Wired Ethernet 10/100M bits/sec via RJ-45 socket Line out socket 3.5mm diameter, stereo WiFi 802.11b and 802.11g supported with Optical S/PIDF output socket Toslink WEP and WPA/WPA2 encryption Compatible with 802.11n routers which offer mixed mode support for 802.