Instruction manual

ManualsBrandsSangean Manualsaudio & home theatreWR-11

WR-11 Wooden cabinet AM/FM 2 bands radio

Instruction Manual

Features

AM/FM 2 bands

Wooden cabinet made of MDF in real cherry or walnut or other optional

wood veneer .

Soft and precision tuning

Rotary tuning and volume control

Tuning LED indicator

Detachable power cord

Headphone socket

REC out socket can be used as a separate tuner to the Hi-Fi amplifier or

record the radio program by using the output .

Aux in. socket to connect stereo/mono audio source like CD walkman

3 inches 7W full range heavy-duty magnet speaker

Dynamic Bass compensation for rich bass

External AM antenna terminal to connect outdoors AM antenna ( USA

version only )

External F type FM antenna terminal to connect outdoors FM antenna

Internal/External FM antenna switch to select built-in or external antenna

9-14 voltages power adaptor socket for AC adaptor or vehicle/boat power

Summary of content (5 pages)

PAGE 1
WR-11 Wooden cabinet AM/FM 2 bands radio Instruction Manual Features AM/FM 2 bands Wooden cabinet made of MDF in real cherry or walnut or other optional wood veneer . Soft and precision tuning Rotary tuning and volume control Tuning LED indicator Detachable power cord Headphone socket REC out socket can be used as a separate tuner to the Hi-Fi amplifier or record the radio program by using the output . Aux in.
PAGE 2
Controls 1. Power and AM/FM band switch 2. Volume Control 3. Speaker 4. Dial scale 5. Dial indicator 6. Tuning Control 7. AC power cord socket 8. 12V DC input socket ( ideal for vehicles/boats ) 9. Headphone socket 10. REC out socket 11. Aux in socket 12. External/Internal antenna switch 13. F-type external antenna terminal 14. AM external antenna terminal (USA version only ) 15.
PAGE 3
Power your radio AC operation Before you plug the AC cord into the radio , be sure the AC voltage is correct . Insert the plug on the end of the supplied power cord into the AC power socket on the back of the radio . DC operation For outdoors use , you can power the radio by using 12V DC input socket from a DC power supply ( example , from the power supply of vehicles or boats ) . An AC power adaptor with 1 Ampere and center positive in polarity can also power the radio in house . Operating your radio FM 1.
PAGE 4
outdoor AM antenna with AM antenna terminal ( USA version only ). 2. Turn on your radio by switching the Power knob to AM position . 3. Rotate the Tuning Control to select the desired station . On AM , the tuning scale is marked in kHz (Kilohertz) . The tuning LED will appear brightest when best tuning has been achieved . 4. Rotate your radio for best reception . 5. Adjust the Volume Control for comfortable listening . 6. To switch off your radio , turn the power knob to OFF position .
PAGE 5
FM F-type antenna terminal Output Power : 7W 10% T.H.D. @100Hz Headphones socket : 3.5 mm dia. Stereo jack monaural output Output : 5mW + 5mW Aux in socket : 3.5 mm dia. Stereo jack . Input sensitivity : IN 150mV Output 7W @100Hz Input impedance :47 Kohm REC OUT : output impedance : 2.2Kohm DC IN : 12V/1A center pin positive (operational voltage 9-14V) Accessories : FM F-terminal antenna wire AC power Cord F to PAL terminal adapter ( European version only ) Dimension : 240(W) x 114 (H) x 169.