Data Sheet

Bluetooth Module 5.0 SBM-2715-C2
www.sangshinec.com Preliminary Specification. Page 15 / 21
11. RF Specifications
11.1. Basic Rate Transmitter Performance
RF Characteristics MIN TYP MAX
Bluetooth
Specification
Unit
Maximum Transmit power 4 7 10 0 to 20 [dBm]
RF Power variation over temperature range ±1 [dB]
20 dB Bandwidth for modulated carrier 920 1000 ≤1000 KHz
ACP
F=F0 ± 2MHz -36 -20 ≤-20 [dBm]
F=F0 ± 3MHz -42 -36 ≤-40 [dBm]
F=F0±>3MHz -65 -40 ≤-40 [dBm]
Δf 1avg Maximum modulation 140 165 175 140<Δf 1avg<175 KHz
Δf 2max Minimum modulation 115 142 ≥115 KHz
Δf 2avg / Δf 1avg 0.8 0.9 ≥0.8 -
ICFT -75 5 75 ±75 KHz
Drift rate 5 20 ≤20 KHz/50us
Drift (Single slot packet) 6 25 ≤25 KHz
Drift (five slot packet) 6 40 ≤40 KHz
2
nd
harmonic content -27 [dBm]
3
rd
harmonic content -26 [dBm]
11.2. Basic Rate Receiver Performance
RF
Characteristics
Frequency(GHz) MIN TYP MAX
Bluetooth
Specification
Unit
Sensitivity at 0.1 % BER
for all basic rate Packet type
2.402 -82 -80
≤-70 [dBm] 2.441 -87 -84
2.480 -87 -84
Maximum received signal at 0.1% BER -20 >-10 >-10 ≥-20 [dBm]
Continuous power required
to block Bluetooth reception
(For input power of -67 dBm
With 0.1% BER)
0.030-2.000 -10 >1 -10
[dBm]
2.000-2.400 -27 -7 -27
2.500-3.000 -27 -6 -27
3.000-12.75 -10 >3 -10
C/I-Co-channel 5 11 ≤11 [dB]
Adjacent channel
Selectivity C/I
F=F0+1MHz -5 0 ≤0
[dB]
F=F0-1MHz -3 0 ≤0
F=F0+2MHz -40 -30 ≤-30
F=F0-2MHz -32 -20 ≤-20
F=F0-3MHz -47 -40 ≤-40
F=F0-5MHz -48 -40 ≤-40
F=F image -31 -9 ≤-9
Maximum level of intermodulation interferers -39 -15 ≥-39 [dBm]
Spurious output level -155 dBm / Hz