User manual

37
After you have setup the scan settings, you can start scanning the memory card. From
the main menu, select More>Tools>Card Tools>Scan/Repair
Quick Scan:
This process will write in data and read out data from every sector of the memory card.
The memory card is considered to be error-free if the write in and read out process is
successful and the read/write data is consistent. All data in the memory card will be
deleted in the process. Before you do a Quick Scan, make sure that the memory card
does not contain any data that you might need.
Standard Scan:
In this process, the data in the memory card is first copied to COLORSPACE O hard drive
before the write/read scan as described in Quick Scan above is performed. After the
scan is completed, the original data is copied back to the memory card again. As
read/write process is performed twice, this process is slower than Quick Scan but it will
preserve all the data on the memory card. However, if there are defective sectors, the
risk of losing the data stored on these sectors will still be present.
Quick Scan and Standard Scan
As some memory cards use dynamic remapping technology, it is normal
for defective sectors to either disappear or change location.
Note