Product Overview

CONNECTIONS
SANIBEST PRO • PART N
O
013
SANIBEST
®
Pro Grinder
Example of installation. Follow local plumbing codes for actual install. Example of installation. Follow local plumbing codes for actual install.
The Sanibest Pro is a 1 HP pump system used to install a complete bathroom up to 25 feet below the
sewer line, or even up to 150 feet away from a soil stack. It incorporates a grinder system which is ideal
for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices,
warehouses, etc). The Sanibest Pro is designed to handle sanitary products that may have been flushed
down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
Discharges the waste through a 3⁄4” or 1” rigid pipe. A non-return valve is included on the discharge
elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the
discharge installation.
Has been designed with a 1–1⁄2” vent connection on the top of the lid. All plumbing codes require
connection to a vent system. Please note that the vent system should be a two-way air vent as air needs
to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is
not permitted.
Must be connected to Saniflo’s 1.28 GPF / 4.8 LPF rear discharge toilet. These toilets come in round and
elongated (ADA compliant) models. More technical information on page 6.
Will also discharge gray water from any sink, bath/shower, urinal and even a washing machine (indirect
connection). The wastewater will drain into the system via two 2” inlets with built-in check valves on
either side of the housing. Note that when adding a bathtub/shower, the base should be raised up by a
minimum of 8” off the floor.
An easy access service panel is located on top of the pump. This will give you easy access to the electrical
components such as the capacitor, microswitch, electronic board and membrane. For a full list of parts,
please refer to the next page.
INSTALLATION BEHIND THE TOILET
INSTALLATION BEHIND THE WALL
ASME A112.3.4
APPLICATIONS
RESIDENTIAL
COMMERCIAL
TOILET
LAUNDRY
SINK
SHOWER
SINK
WASHING
MACHINE
BATHTUB
PUMPING DISTANCE
25 Ft
150 Ft
Toilet Tank
(Part N
o
005)
Insulated 1.28 GPF / 4.8 LPF toilet tank equipped with all internal
valves. For more information, please turn to page 6.
Round/Elongated Bowl
(Part N
o
083 or 087)
Rear discharge toilet with 16 3/4” seating height (Elongated
bowl is ADA compliant). For more information, please turn to
page 6.
Extension Pipe
(Part N
o
030)
18” long PVC pipe with internal gasket used to hide the pump
behind the wall. For more information, please turn to page 51.
Sanibest Pro
(Part N
o
013)
1 HP grinder pump for commercial applications that is able
to handle the accidental flushing of sanitary napkins from full
bathroom applications.
14