Spec Sheet

Saniflo Product Release: SANICOM 1

Page 2 of 3

“Saniflo’s Sanicom 1 is a versatile drain pump that can effectively serve a variety of customer

needs—from restaurant managers seeking to drain high-temperature dish water, to processing

engineers needing to pump out wastewater resulting from food production,” says Regis

Saragosti, CEO of Saniflo USA.

Operation

The Sanicom 1 is capable of reliably and

efficiently handling multiple gray water fixtures

simultaneously, including commercial

dishwashers, washing machines and other

heavy-duty wastewater applications.

Gray water enters through one of two side inlets,

both measuring 2 inches, before being pumped to

the drain line through a 1-inch rigid discharge

pipe, which can remove up to 33 gallons per minute (gpm). The system includes a rubber

discharge elbow that adapts to the discharge pipe and can be rotated 360 degrees, as well as a

non-return valve.

Sanicom 1 is able to discharge gray water up to 25 feet vertically, 250 feet horizontally, or a

combination of both. (A vertical run of 3 feet is equal to a horizontal run of 30 feet.) It should be

noted that when draining wastewater into the pump through either of the side inlets, an external

check valve (not supplied) needs to be installed. The powerful, 1-horsepower motor and a non-

clogging impeller design allow the unit to pass laundry lint and other small solids up to 3/8

inches in diameter.

The unit vents through a 1-1/4-inch vent connection located on top. A two-way air vent should

be used to allow free air flow both ways.

Install it Anywhere

Unlike conventional plumbing installations, which may involve the hassle and expense of

breaking through concrete to connect to a drain line, the Sanicom 1 above-floor plumbing

system allows for a dishwasher or washing machine wherever needed.

-more-

The Sanicom 1 can handle multiple gray water fixtures

simultaneously, including commercial dishwashers,

washing machines and other heavy-duty wastewater

applications.