Product Overview

CONNECTIONS
SANICUBIC 2 • PART N
O
029
SANICUBIC
®
2 Grinder
Example of installation. Follow local plumbing codes for actual install. Example of installation. Follow local plumbing codes for actual install.
The Sanicubic 2 is a 1 HP heavy duty duplex grinder system used to pump away wastewater from
several bathrooms and fixtures from an entire building structure. This system is able to discharge the
waste up to 36 feet vertical and/or 328 feet horizontal. It incorporates a grinder system which is ideal
for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices,
warehouses, etc). The Sanicubic 2 is designed to handle sanitary products that may have been flushed
down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
Discharges the waste through a 1–1⁄ 2” rigid pipe. A couple of non-return valves are included on the
internal discharge pipe connection of this system.
Has been designed with a 1–1⁄ 2” vent connection on top of the enclosure. All plumbing codes require
connection to a vent system. Please note that the vent system should be a two-way air vent as air needs
to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices
is not permitted.
The Sanicubic 2 is IP68 rated for possible submergence which eliminates any potential water damage to
internal components. It comes equipped with an external control panel as well as a visual and audible
alarm system (15 Ft long wire).
The pump discharges wastewater from several toilets, sinks, bath/showers, urinals and even washing
machines. The wastewater from other sanitary fixtures is drained into the Sanicubic 2 via five 1–1⁄ 2”
or 4” inlets on either side of the housing and on top of the enclosure. Note that when draining waste
water into the pump through either of the side inlets, an external check valve (not supplied) has to be
installed. Also, note that there should be a minimum 10” height difference between the base of the
Sanicubic 2 to the bottom of the shower/bathtub drain or to the base of the toilet.
INSTALLATION ABOVE GROUND
INSTALLATION BELOW THE GROUND
ASME A112.3.4
APPLICATIONS
COMMERCIAL
PUMPING DISTANCE
DUPLEX GRINDING SYSTEM CAPABLE
OF DISCHARGING WASTEWATER
FROM MULTIPLE FIXTURES FROM ENTIRE
BUILDING STRUCTURES
Two powerful 1 HP motors for absolute reliability and
efficiency. New grinding technology eliminates clogging
issues found on sewage ejector stations as it can handle
feminine hygiene products.
Smart-pump technology allows both pumps to work
simultaneously if the incoming rate is higher than the
discharge rate of the single pump. The discharge rate
increases roughly 80% until the condition is alleviated.
System is capable of handling multiple fixtures at the same
time as it can handle up to 90 gallons per minute.
36 Ft
328 Ft
CONNECTIONS
SINK
WASHING
MACHINE
BATHTUB
DISHWASHER
TOILET
LAUNDRY
SINK
SHOWER
BAR SINK
54