HYBRID DRYER SC6055 Owner’s Guide Part No. SC6055 (4/13) ©2013 Electrolux Home Care Products Ltd.
Your new Sanitaire unit is a high quality, precision-made product. All parts used in the manufacturing of this unit have passed rigid quality control standards prior to assembly. The motor is warranted for 1 year from the date of purchase as shown on your receipt / invoice. All other parts are warranted for 90 days from the date of purchase. Failures due to misuse, neglect, abuse or normal wear and tear are not covered by this warranty.
• • • • • • • • • • • Do not handle the plug or the unit with wet hands. To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials. Do not store near hazardous materials. Do not use the unit with a torn filter or without the filter installed except when vacuuming liquids as described in the operations section of this manual. Do not allow it be used as a toy. Close attention is necessary when used by or near children.
Power Cord Speed Selector Switch Stacking Guide Kickstand Cord Wrap Side Stand Exhaust Port Daisy chain outlet The Speed selector switch provides the following settings, III = High Speed, Figure 1; II = Medium Speed, Figure 2; I = Lo, Figure 3; and 0 = Off, Figure 4.
WARNING: if too much air is exhausted from a space with Open Combustion Devices (e.g. furnaces, fireplaces or water heaters) can cause those devices to back draft. This can contaminate the space with potential fatal gases. This unit should only be used as a recirculating fan. WARNING: When exhausting air from a space, always check Combustion Devices with the fan running to guarantee the back drafting prevention measures are working.
WARNING: Always unplug machine before cleaning, or making adjustments or repairs. Note: Always store the Hybrid Dryer in a dry place. After Every Use: • Remove any lint or debris from the intake screen. • Clean cord with a window cleaner (or similar) and wrap. Monthly: • Inspect all electrical connections and cord. • If you see any noticeable build-up of debris in the motor and/or fan, remove the intake screen and fan. Vacuum clean and replace.
