Owner`s manual

ManualsBrandsSanitaire ManualsFloor MachineSC6088 Series

10 GALLON

Box Extractor

SC6088 Series

Part No. SC6088 Rev 2 (3/14)

Owner’s Guide

PLEASE RETAIN

We suggest you record the model, type, and serial numbers

below. They are located on the silver rating plate on your

unit. For prompt and complete service information, always

refer to these numbers when inquiring about service.

Model & Type____________________________

Serial No._______________________________

It is also important to keep your receipt as proof of date of

purchase.

IMPORTANT

Do not return this product to the store.

Call 1-800-800-8975*

Monday - Friday 8:00 AM to 7:30 PM

and Saturday 10 AM to 6:30 PM

Central time or visit our web site,

www.sanitairevac.com for any of the

following:

• assembly problems

• replacement of broken or missing

items

• to review repair parts list

• to order replacement parts and

accessories

• to locate the nearest Sanitaire

warranty station

*En Mexico llame al 5670-6169

www.sanitairevac.com

Sanitaire

X1063

Summary of content (9 pages)

PAGE 1
Sanitaire® 10 GALLON Box Extractor SC6088 Series Part No. SC6088 Rev 2 (3/14) Owner’s Guide IMPORTANT Do not return this product to the store. Call 1-800-800-8975* Monday - Friday 8:00 AM to 7:30 PM and Saturday 10 AM to 6:30 PM Central time or visit our web site, www.sanitairevac.
PAGE 2
WARRANTY Your new Sanitaire unit is a high quality, precision-made product. All parts used in the manufacturing of this unit have passed rigid quality control standards prior to assembly. The motor is warranted for 1 year from the date of purchase as shown on your receipt / invoice. All other parts are warranted for 90 days from the date of purchase. Failures due to misuse, neglect, abuse or normal wear and tear are not covered by this warranty.
PAGE 3
SAFETY INSTRUCTIONS & WARNINGS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT Read and understand this owner’s manual and all labels on the unit before operating. Safety is a combination of common sense,staying alert and knowing how your unit works. Use this unit only as described in this manual. Use only manufacturer’s recommended attachments.
PAGE 4
EXTENSION CORDS When using an extension cord with your unit, refer to the following table to determine the required A.W.G. wire size. Before using the cleaner make sure the power cord and extension cord are in good working condition. Make repairs or replacements before using the carpet extractor. Only use extension cords that are rated for outdoor use. Length of Extension Cord 25 Feet 50 Feet 100 Feet 150 Feet 7.5 Meter 15.25 Meter 30.5 Meter 45.7 Meter A.W.G.
PAGE 5
4. Assemble the wand by sliding the top portion into the lower portion. (Fig 3) 8. Turn on the heater. Begin cleaning. (Fig 7) Fig 7 9. Empty the recovery tank by using the drain hose on the front of the machine. Do not use the same pail to fill the solution tank as this can result in putting dirt and grit into the solution line that can plug filters, orifices, and degrade system (do not reuse solution). (Fig 8) Fig 3 5. Attach the hose system to the unit and to your carpet wand.
PAGE 6
MAINTENANCE GUIDE To receive reliable service from this equipment, regular daily maintenance is required. 1. Keep the equipment clean, both inside and out. 2. Lubricate brass quick disconnects with a quality lubricant. (Fig 10) Fig 12 7. At the end of each day, run the vacuum for 3 minutes with lid open and filter off. (Figs 12 & 13) Fig 10 3. Flush solution systems after use with clear, clean water. (A white vinegar solution of 1 part vinegar to 8 parts water may also be used).
PAGE 7
STORAGE OF EQUIPMENT 1. Store extractor indoors in dry area. 2. Recovery and solution tank should be empty and clean when the extractor is not in use. 3. Leave the recovery lid and dump valve open to air out the recovery tank. 4. Do not store in freezing temperature. 5. A small amount of windshield washer fluid may be left in the pump and internal solution line for protection against freezing. WARNINGS 1. Do not use citrus-based (D-Limonene) cleaners in this machine. 2.
PAGE 8
LOW VACUUM AT THE MACHINE CAUSE: 1) Drain hose open 2) Lint screen clogged 3) Damaged recovery tank 4) Clogged vacuum motor exhaust port CAUSE: 1) Faulty vacuum motor 2) Float activated SOLUTION: 1) Close drain hose 2) Clean 3) Replace 4) Clean MOTOR RUNNING AND NO VACUUM SOLUTION: 1) Replace 2) Empty tank or clean float cage PREMATURE FLOAT ACTIVATION OR FAILURE OF FLOAT TO RELEASE CAUSE: 1) Dirty or clogged float cage.
PAGE 9
LOW PUMP PRESSURE CAUSE: 1) Clogged strained in solution tank 2) Punctured pump diaphragm 3) Defective rectifier or motor SOLUTION: 1) Clean and replace. 2) Replace. 3) Replace. PUMP PRESSURE VARIES CAUSE: 1) Defective pump. SOLUTION: 1) Replace pressure control switch.