Owner`s manual

5
5. Attach the hose system to the unit and to
your carpet wand. (Fig 4)
6. Turn on the pump. (Fig 5)
Fig 5
7. Turn vacuum switch to the “on” position.
(Fig 6)
9. Empty the recovery tank by using the drain
hose on the front of the machine. Do not use
thesamepailtollthesolutiontankasthiscan
result in putting dirt and grit into the solution
linethatcanpluglters,orices,anddegrade
system (do not reuse solution). (Fig 8)
Fig 4
Fig 8
Fig 6
Fig 7
8. Turn on the heater. Begin cleaning. (Fig 7)
10. To empty solution tank, detach the vacuum
hose from the end of the wand and insert it into
the solution tank. Turn the vacuum switch to
“on” position and transfer solution to recovery
tank. (Fig 9)
Fig 9
4. Assemble the wand by sliding the top por-
tion into the lower portion. (Fig 3)
Fig 3