Owner`s manual

EXTENSION CORDS

When using an extension cord with your unit, refer to the following table to determine the required

A.W.G. wire size. Before using the unit make sure the power cord and extension cord are in good

working condition. Make repairs or replacements before using the unit.

Only use extension cords that are rated for outdoor use.

Length of Extension Cord

25 Feet 50 Feet 100 Feet 150 Feet

110V-120V 7.5 Meter 15.25 Meter 30.5 Meter 45.7 Meter

Amps A.W.G. Wire Size

0-6 18 16 16 14

7-10 18 16 14 12

11-12 16 16 14 12

13-16 14 12 Not recommended

HANDLE ADJUSTMENT

1. Loosen the handle lock levers (Fig 1) on both sides of the unit

and adjust the handle to a comfortable operation height.

2. Tighten the handle lock lever on both sides to lock the handle

in place.

BAG INSTALLATION

Fig 1

1. Attach the cloth zippered bag by placing the opening seal securely around the neck of the exhaust

opening (Fig 2). Connect the snap from the bag to the exhaust frame.

2. Connect the 2 snaps in the front of the bag onto the top of the unit (Fig 3).

3. Unzip the cloth bag (Fig 4) and install the paper bag inside (Fig 5).

4. Attach the paper bag onto the vacuum exhaust opening.

5. Completely close the zipper of the cloth bag (Fig 6).

Note: To maintain optimum performance change the paper bag when it is nearly full or when suction

diminishes.

ATTENTION: Never operate the unit without both the cloth bag and paper bag.

Fig 2

Fig 3

Fig 4