Owner`s manual

5
BRUSH HEIGHT ADJUSTMENT
Fig 5 Fig 6
1. This machine has 5 brush height adjustment levels.
2. To lower the brush: depress to lower pedal and release one notch of the ratchet at a time until the
desired height is reached (Fig 7).
3. To raise the brush: depress the top pedal (Fig 8).
4. When the machine is not in use, always place the nozzle in the up position to lift the brush bristles
offoftheoortopreventdamagingthebrushbristles.
Fig 8Fig 7
OPERATION OF MACHINE
1. Plug the power cord into a properly grounded power outlet.
2. To turn On the machine, press the ON/OFF switch to the ON position (Fig 9). Note: “O” is the inter-
national symbol for “Off” and “l” is the symbol for “On”.
3. Squeeze the brush start trigger to activate both the brush and the vacuum (Fig 10)
4. Adjust the brush height for proper pick-up.
OFF
ON
Fig 9
SWITCH
BRUSH START
TRIGGERS
Fig 10