Owner`s manual
6
CIRCUIT BREAKER
Your new unit comes equipped with a 15 amp manual circuit
breaker. If the machine does not turn on you will need to check
the circuit breaker.
To reset the circuit breaker:
1. Unplug the unit.
2. Check the unit for the following:
Full bag, obstructions, clogged brush, brush height set too low.
3. Press the circuit breaker button to reset.
4. Plug the unit in.
5. Resume operation.
Tools:
•4mmAllenwrench
•10mmwrench
•PhillipsHeadScrewDriver
1. Detach belt cover by removing the 4 belt cover screws as shown in the picture below. This will
expose the belt connected to the brush roll.
BRUSH ROLL REPLACEMENT