Owner`s manual
12
•Checkthestatusofthebatterychargebypressing
brush switch 3. (Fig 9)
•Checkthatthewaterlteriscleanandfreeofdebris
(Fig 13).
4.2 Preparing the machine and choosing
the cycle
•Pressthebrushmotorbutton(#3,Fig9).Thelight
illuminates.
•Pullthesqueegeeliftingleverandreleaseittolower
thesqueegeetotheoor(Fig14).
The machine can perform 4 working cycles:
•Dryingonlycycle
Press and hold lever 5 (Fig 10) for brush rotation; then
press button 2 (Fig 9) to start the vacuum.
•Brushingonlycycle
Press and hold lever 5 (Fig 9). Releasing the lever
stops the brush.
•Washing,brushingcycle:
Press button 4 (Fig 9) to enable dispensing of solution.
Presslever5(Fig10)toreleasesolutionontooor.
Fig 12
Fig 13
Fig 14
•Washing,brushing,dryingcycle
Press button 2 to start the vacuum, button 4 (Fig 9) to
release solution and press the lever 5 (Fig 10) to start
the cycle.
4.3 Using the machine
WARNING! Never start the machine without
a brush or pad attached.
•Setthehandlesetatacomfortableworkingheight.
•Startthemachineandselectthetypeofcycle.Startthe
cleaning operation by pressing the levers and holding
them pressed to start rotation of the brush or pad and
to dispense cleaning solution, then push the machine
in a forward direction using handles on the handle bar.
•Releasingtheleverstopstherotationofthebrushand
the dispensing of solution.
WARNING–toavoiddamagingtheoor
DONOTusethemachineinaxed
position with the brush rotation activated.
The machine must be moving while the
brush is rotating.
• IMPORTANT – the correct way of cleaning and drying
theooristomovethemachineforward.Movingthe
machine backwards damages the blades and does not
allowwatertobevacuumedfromtheoor.
•Ifnecessary,adjustthevolumeofsolutionusingthe
tap(SeeFig15&16).
•Checkthestatusofthebatterychargebytheindicator
(Fig 17).
•Proceedtooperatethemachineinthenormalmanner,
releasing cleaning solution from time to time as
required.
•Forheavysoil,scruboorwithcleaningsolutionbut
Fig 15 Solution tap fully opened
Fig 16 Solution tap fully closed