Installation Guide

1. The water pressure limit ranges from 10 to 110 PSI. Please use as inﬆructed.

2. The water shutoﬀ valve should be near where the product can be inﬆalled and dismantled.

Please read the following inﬆructions carefully and inﬆall your Saniwise Bidet Seat

properly.

Preparation

Insert the connecting bolts into the sliding plates.

Insert the connecting bolts into the holes of the sliding plates, as shown in the ﬁgure below.

2. Insert the connecting bolts with the sliding plates into the adapter plate.

Insert the connecting bolts with the sliding plates into the holes of the adapter

plate, as shown in the ﬁgure below.

Caution