User manual

268 SANRAD V-Switch User Manual
Use the CLI command volume create striped to create a striped
volume, Stripe1.
volume create striped –vol Stripe1 –nbc 2 –sus 64 –ch
Mirror1 –ch Mirror2
STEP 13. C
REATE ISCSI TARGET AND LUN
After creating the final virtual volume configuration that you want to expose to
the network hosts, you need to create an iSCSI target for the volume as well as
attach LUN0 to the target volume. Use the CLI command
volume expose
-new
to create the iSCSI target and attach LUN0 to the striped volume,
Stripe1.
volume expose -new –vol Stripe1 –ta storage –tn
billing.sanrad –device VSwitch
STEP 14. C
ONFIGURE HOST STATION INITIATOR
Open the Microsoft iSCSI initiator program on host station 1.
Figure 108. Microsoft iSCSI Initiator
Click Add from the Target Portals tab. The Add Target Portal dialog box
opens.