Specifications
19
Hot water
Check through the water level indicator (L) that there is sufficient water in the boiler before dispensing
hot water or steam.
Ensure that the boiler pressure gauge indicates a pressure of 0.5:1 bar.
Press the button (M6) to dispense hot water and press again to stop.
Pay the utmost attention in order to prevent scald burns.
Steam
Except for the 1-group machine that has just one steam nozzle, all the other models have 2 located
at the sides. These steam nozzles are recessed but can swivel out thanks to an articulated joint. To
dispense steam, just turn the knobs (B) counter-clockwise.
Pay the utmost attention in order to prevent scald burns.
Coffee with Mod. MILANO LX SAP
Insert the filter holder (E) into the group head (F) turning the filter holder counter-clockwise. Press
the button (I) and wait for the required quantity of coffee to be dispensed, then put it back to its
original position.
Coffee with Mod. MILANO LX SED
Insert the filter holder (E) into the group head (F) turning the filter holder counter-clockwise. Using
the keypad (M) select the caption corresponding to the required type of coffee:
M1=One strong/normal coffee.
M2=One normal/weak coffee.
M3=Two strong/normal coffees.
M4=Two normal/weak coffees.
M5=Key for electronic programming or continual manual dispensing.
Before using the appliance the operator must check that the water level in the boiler is above the
minimum level by looking at the indicator (L).
CLEANING
Filter: after having dispensed the last cup of coffee, the filter and filter holder must be washed with
water. If they are damaged, worn or clogged, they should be replaced.
Drip tray and grid: the drip tray and grid should be removed frequently and coffee residues
cleaned away.
Water softener: the softener should be periodically regenerated according to the manufacturer’s
directions given in the instruction booklet.
External housing: the external housing and the steel parts should be cleaned with sponges
and soft cloths to avoid scratching. Only use detergents that do not contain abrasive powders or
solvents and do not use steel wool.
WARNINGS: when using the appliance it is recommended that the various instruments be kept
under control, checking that they are in the previously indicated normal working conditions.
ENGLISH