ELITENAS EN104L+ (B) QUICK INSTALLATION GUIDE v1.
TABLE OF CONTENTS End User License Agreement ................................................................ 3 Hardware Information ......................................................... Package Contents ...................................................................................... Hardware Connection Diagram ............................................................ Hard Drive Installation .............................................................................
SANS DIGITAL END USER LICENSE AGREEMENT This End User License Agreement (“Agreement”) is a legal agreement between Sans Digital.
HARDWARE INFORMATION INTEGRATION AND SETUP PACKAGE CONTENTS DEFAULT SETTINGS: EN104l+ / EN104L+B / EN104L+XE / EN104L+BXE .................................................................... 1 Power Cord ............................................................................................................................................... 1 Manual / CD ...............................................................................................................................................
. To setup the TCP/IP, type ‘3’ and press ‘enter’. CONSOLE LOGIN – Assigning IP to the NAS from the Console If the NAS unit could not be detected via the NAS-Finder Utility, console login could be used for detection by conneting a keyboard and monitor to the NAS unit. Power on the NAS unit and a DOS dialog box will prompt the user to enter a username and a password. The default settings are as below: Username: root Password: 0000 1.
VOLUME MANAGEMENT BEFORE GETTING STARTED 1. 2. 3. By now, the NAS unit should have an assigned static IP by following the previous steps. To manage the NAS unit from the Web GUI, Java Runtime must be installed. Java Runtime allows the managing station (such as a laptop) to communicate with the NAS unit during NAS reboot, and provides the accurate countdown for the NAS unit to auto-reconnect with the Web GUI. In the managing station’s web browser, type the defined IP address of the NAS unit, such as: 192.
Step-5: Select “Storage Manager” -> “Logical Volume Manager” LV is the actual share used via Microsoft Network, AFP or NFS. The name assigned will be the share name. Step-7: Select “User & Access” -> “Access Control – Microsoft” Choose a Volume (Network Share). By default, all users with account on the EN104L+(B) are given full access to the volume. To create the LV: 1. Select the appropriate PV. 2. Assign a name to the share under “Volume Name”. 3.
NAS SETUP WORK-FLOW STEP #1 Locate the NAS & Assign IP Enter “2” to display default NAS info (IP) Use Web Browser to point to the IP Login and move to “Network Setting” Assign Static IP to NIC-0 STEP #2 Create RAID Volume Go to “Storage Manage” -> “RAID Manager” Create RAID array Wait for initialization to finish (It may take 3 - 8 hours depending on the capacity) STEP #3 Create Logical Volume Go to “Storage Manage” -> “Volume Group Manager” Select “RV” Create “PV” from “RV” (RV = Raw Volume PV
WWW.SANSDIGITAL.
