System information

TowerSTOR TS4CT System Setup
Page 12
3.4.5 Fan Speed Setup
For the smart-fan to automatically regulate the fan speed according to the internal temperature, the
thermal probe has to be installed.
x [Automatic] Regulates the fan speed according to the HDD temperature (below 45˚C = low
speed, 45-60˚C = speed increases in 5 steps, above 61˚C = high speed).
x [HighSpeed] Fan speed is set to high speed.
x [LowSpeed] Fan speed is set to low speed.
x [OFF] The fan is turned off. This setting should only be used if the device is located in a cool
and temperature controlled room.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
different options.
x To exit the menu without changing any of the settings, press the [Select] button until you see
the Exit screen and then press the [OK] button.
x To change the setting, press the [Select] button to choose your preferred mode and then press
the [OK] button to confirm the change.