Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 37 Installation and Technical Application Guide HNB-A, HNB-B and HNB-C HNB-A HNB-B HNB-C Audio Video / IR RF Wireless HNB™ Modular Multimedia Systems Digital Audio, Video and RF wireless Teacher shown wearing HNB-C System RF wireless microphone Model TM3 System shown includes HNB-A + HNB-B + HNB-C installed in a 6-gang configuration HNB™: PATENT PENDING SonicDevices n 9950 Baldwin Place, El Monte CA 91731 n (T) 6
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:38 PM Page 2 Page 2 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications IMPORTANT SAFETY INSTRUCTIONS WARNING CLASS 2 WIRING MUST BE USED. Make all wiring connections prior to AC connection and power up. WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:38 PM Page 3 Page 3 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications TABLE OF CONTENTS Section Page 1 Introduction and Applications ......................................................................................................................4 2 System Overview and Specifications ..........................................................................
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:38 PM Page 4 Page 4 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 1.0 - HNB-A + HNB-B + HNB-C INTRODUCTION AND APPLICATIONS Each HNB system: •is 2-gang and includes a 2-gang wall plate. •may be installed into any combination of 2, 3, 4, 5, 6-gang electrical boxes that are 3.5" DEEP. •connects via CAT5e UTP cable.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:38 PM Page 5 Page 5 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 1.1 HNB-A: AUDIO system HNB-A Contents: (1) HNB-2-gang metal chassis (1) 2-gang Decora white wall plate (1) HB-2PA Preamp card (1) HB-1S Digital amp card (1) HB-PS Power supply 24VDC/2.5A HNB-A Included Accessory - HNB-A HB-PS power supply 1.2 Basic Capabilities HNB-A • Fits standard 3.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 6 Page 6 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 1.3 HNB-C: RF WIRELESS System with Receive and Transmit Capability (requires HNB-A) HNB-C Contents: (1) HNB-C 2-gang metal chassis (1) 2-gang Decora white wallplate (1) HB-Rx Receiver card (1) HB-Tx Transmitter card (1) TM2 Teacher Microphone with transmitter.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 7 Page 7 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications HNB Classroom Application: HNB-A + HNB-B + HNB-C (AUDIO + VIDEO-IR + RF WIRELESS) 1.5 4 or 8-ohm Speakers* Emergency Communications Systems HNB-A + HNB-B School Intercom / PA, EPA (Audio + Video-IR) Power Supply HNB-C AV Projector VGA / RGB, S-Video, Composite 1 CAT5e UTP / 150 ft.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 8 Page 8 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 2.0 - HNB-A + HNB-B + HNB-C OVERVIEW 2.1 HNB-A, HNB-B and HNB-C Series Technical Specifications Type 2 Channel Mixer Amplifier Architecture Digital Class-D amplifier, Microcontroller Mains Input Power 100-240VAC, 50-60Hz / Energy Star Rated Input Power (to HNBTM) 24VDC/2.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 9 Page 9 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 2.2 Dimensions HNB-A, HNB-B and HNB-C HNB-A (shown without cover plate) NOTE: HNB-B and HNB-C have the same dimensions. SonicDevices n 9950 Baldwin Place, El Monte CA 91731 n (T) 626-454-8169 n (F) 626-433-1079 n (W) www.sonicdevices.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 10 Page 10 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 2.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 11 Page 11 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 3.0 - HNB-A + HNB-B + HNB-C SYSTEM COMPONENTS 3.1 Plug-in Module: Amplifier Module HB-1S Amplifier Module (HB-1S) The HNB amplifier module HB-1S is included with HNB-A.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 12 Page 12 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 13 Page 13 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.4 Plug-in Module with Remote: IR Module HB-IR and Hand-held Remote HB-IRRC IR Module (HB-IR) The HNB IR module HB-IR is an integrated high performance infrared dual channel micro-controlled receiving module that is operational up to 50 feet / 15 meters to control and shape HNB audio.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 14 Page 14 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.6 Plug-in Modules for RF Wireless: Receive Module HB-RX and Transmit Module HB-TX HB-Rx Wireless 2-channel RF RECEIVER Module The HB‐Rx RF Wireless Receiver module is included in all versions of HNB‐C providing multiple (x2) independent RF wireless channels operating simultaneously.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 15 istening Receiver Page 15 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.7 Microphones with Accessories for RF Wireless Teacher Microphones (TM1, TM2, TM3) TM1 TM2 Over-the-ear style with built-in Transmitter Around-the-neck style with 2oz. transmitter belt clip and lanyard • High performance voice intelligible microphone 100Hz-15kHz.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 16 HNB-A / HNB-B CHASSIS - BACKPLANES / INPUTS AND CONTROLS Page 16 HNB-A FRONT VIEW Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 17 Page 17 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 3.11 HNB-C Chassis FRONT and REAR J2 J1 HNB-C www.sonicdevices.net N · U SA · MM CO ISSIO L ERA COM ED NICATIONS MU FCC ID : QJ8-SWE1000H SERIAL NO.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 18 Page 18 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 4.0 - HNB-A + HNB-B + HNB-C INSTALLATION 4.1 In-wall / In-ceiling installation: 3.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 19 Page 19 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 4.3 Optional Impedance Matching Transformer - for use with 25V-70V speakers HNB-70V2X has high performance 30W matching impedance transformers capable of driving 25V or 70V speakers.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 20 Page 20 Installation and Technical Application Guide HNB-A (rear panel) AUDIO LINE OUTPUT HNBTM (1V - 600 ohmn, -10dB nominal) will output in mono or stereo 4.5 Digital multimedia mixer for Audio, Video and Wireless applications HNB-A Audio Line Output: (1V, 600ohm, -10db nominal, Mono or Stereo) HNB-A REAR EAO-1 IN AUDIO LINE OUT R GND L MFG.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 21 Page 21 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 4.6 HNB-A Emergency Audio OFF ‘EAO-1’ (continued) IMPORTANT NOTE: There must be a primary Fire-Alarm system that works independently from HNB-A,B,C A/V system.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 22 Page 22 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 4.7 HNB-A RJ45 Connector Color Codes RJ45 CONNECTOR WIRED TO EIA568B / TIA568B PAIR 3 PAIR 1 PAIR 2 MFG.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 23 Page 23 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 5.0 - HNB-A SPEAKER WIRING 5.1 HNB-A output connections for speaker wiring SonicDevices n 9950 Baldwin Place, El Monte CA 91731 n (T) 626-454-8169 n (F) 626-433-1079 n (W) www.sonicdevices.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 24 Page 24 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 5.2 HNB-70V2X Impedance Matching Transformer (optional) for use with 25V-70V speakers HNB-70V2X has high performance 30W matching impedance transformers capable of driving 25V or 70V speakers.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 25 Page 25 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 6.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 26 Page 26 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 6.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:39 PM Page 27 Page 27 Installation and Technical Application Guide HNB-B HB-VTx video card + HB-VRx video receiver connections and operation HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 6.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 28 Page 28 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 6.7 HB-IR IR Control Card: Location and Adjustment Note: HB-IR IR Remote Control card installs into the LEFT SLOT of HB-2PA HNB-A and the HB-2P A moves to the LEFT SLOT of HNB-B.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 29 Page 29 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 6.8 HB-IRRC Hand-held Remote Control HB-IRRC hand-held remote control requires an HNB system equipped with an HB-IR ‘IR’ remote module. See section 6.7 6.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 30 Page 30 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 7.0 - HNB-C Wireless Microphone Pairing, Channel Activation, and Charging 7.1 Wireless Microphones: Pairing and Power Overview Channel 1: TM2 or TM3 Microphone Each HB-Rx Receiver module has two (2) channels operating at independent frequencies (2.4GHz / 900MHz).
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 31 Page 31 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 7.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 32 Page 32 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 7.5 SM1 Hand-Held Student Microphone - Activation and Pairing (Channel 2) Step 1: Receiver Press the power (PWR) button on the HB-Rx receiver module for Channel 2. Power ON = Blue LED flashing. NOTE: Only the SM1 microphone can operate on Channel 2.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 33 Page 33 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications HB-RU Assisted Listening Receiver - Activation and Pairing Step 1: Transmitter Step 2: HB-Tx Transmitter Module (close-up of Power/Pairing) Press the power (PWR) button on the HB-Rx receiver module for Channel 1. Power ON = Blue LED flashing.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 34 Page 34 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 7.7 HB-RU Assisted Listening Receiver - Normal Mode - Translation Mode The slide switch for NORMAL BROADCAST mode is in the UP position. The slide switch for TRANSLATION - CHANNEL 2 is in the DOWN position.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 35 Page 35 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications 7.
Sansonic HNB A+B+C installmaULb:Sansonic HNB A+B+C installmaULb 6/29/11 6:40 PM Page 36 Page 36 Installation and Technical Application Guide HNBTM Digital multimedia mixer for Audio, Video and Wireless applications SECTION 9.0 - HNB-A + HNB-B + HNB-C TROUBLESHOOTING GUIDE Projector and source are transmitting and set to compatible source and resolution (see section 6.6).
