OWNER’S MANUAL ENGLISH 32” TFT LCD DIGITAL TV WITH BD PLAYER FHDBDP3209 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. AIR/CABLE MODE SELECTION When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode. If not using Cable TV, set this menu option to the “Air” position.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
IMPORTANT SAFETY INSTRUCTIONS (continued) 23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.
SAFETY PRECAUTIONS ENGLISH VENTILATION CAUTION The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
Disc Playable discs Disc type and logo mark content Blu-ray Video Audio + Video (moving pictures) DVD Video Audio + Video (moving pictures) CD-DA Audio CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors. • If you insert an irregular shaped disc, it may get stuck and cause a malfunction.
How to attach the stand Tips • Unplug the AC cord from the AC INPUT jack. • Before beginning this process, make sure that you lay the unit on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV screen. The glass might break under pressure.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 IMPORTANT NOTICE .......................................5 Disc...................................................................6 How to attach the stand ....................................7 Contents ...........................................................8 Location of controls...........................................9 Remote control ........................................
Location of controls ENGLISH Front Remote sensor POWER indicator Red : Standby Blue : On Left side EJECT button VOLUME +/– buttons DISC slot CHANNEL /1 (PLAY) button CHANNEL /3 (STOP) button MENU button INPUT/ENTER button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL / buttons, VOLUME +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations. 9 53C0221A_EN.
Location of controls (continued) Rear side USB IN jack ETHERNET IN jack RF (ANT) IN jack DIGITAL AUDIO COAXIAL OUT jack COMPONENT IN/AUDIO (L/R) IN jack VIDEO1 IN jack (VIDEO/S-VIDEO/ AUDIO (L/R)) VIDEO2 IN jack (VIDEO/ AUDIO (L/R)) HEADPHONE jack HDMI2 IN jack AC INPUT jack VGA AUDIO IN jack VAR (VARIABLE) AUDIO OUT jacks DVI AUDIO IN jack VGA IN jack HDMI 1/DVI IN jack 10 53C0221A_EN.
Remote control TV/BD EJECT 0-9 INPUT MUTE CH / VOL +/– TV MENU SETUP ▲▼◀▶ ENTER EXIT POPUP MENU/ TITLE DISC MENU ANGLE Power On/Off Call TV information Call DVD information Input “–” for digital channels Switch between TV/AV and Blu-ray Eject a disc ENGLISH POWER DISPLAY/– Direct channel selection of TV Input setting Enter a password Display source selection menu Switch off the sound Select channel of TV Adjust volume of TV Display menu of TV Call up initial setup mode Cursor buttons Enter information
Remote control (continued) Inserting Batteries the battery compartment two “AA” batteries, paying 3 Replace the compartment cover. 1 Open 2 Install cover in the direction of the arrow. attention to the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. ENGLISH If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes blue. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins. Press ◀ or ▶ to select your desired language.
DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear. 62-001 HDTV Moving Picture1 CH-1 Digital TV-14 Air Sleep Timer Off English No Program Information is available Quick guide for menu operation Call menu and for example: Select Language. 1 2 Press INPUT to select TV mode. Press TV MENU. The TV menu screen will appear.
Convenience functions You can change the default settings to convenience use.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection 1 2 3 4 Select “Channel”, then press ▶ or ENTER.
Clear All Ch Label 1 2 3 Channel Number Ch Label Label Clear Select “Channel”, then press ▶ or ENTER. Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. Press ▲ or ▼ to select “Clear All”, then press ▶ or ENTER. 4 Adding Channel Add/Delete Clear All Press ▶ or ENTER to check the Digital-signal strength. The Digital-Signal strength screen will appear. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Setting the V-Chip Genre: ALL D L S V FV An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. Movie Rating To register a password 1 2 Movie Rating G PG PG-13 R NC-17 X Select “Lock”, then press ▶ or ENTER.
6 7 Press ▲ or ▼ to select “V-Chip”, then press ◀ or ▶ to select “On”. Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system. You also need “Update” procedure to update rating information.
5 6 Press ▲ or ▼ to select “CC Advanced”, then press ▶ or ENTER. The CC Advanced menu will appear. Normal In some cases, this image will display the size of standard 4:3 with a black side bar. Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting. CC Advanced Text Size Auto Text Type Auto Text Edge Auto Text Color Auto Text Opacity Auto Background Color Auto Background Opacity Auto : Select : Adjust You can select from among the following items and parameters.
Playing a disc 1 2 3 4 5 Turn on the unit, wait 30 seconds, press TV/BD to select BD mode. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. Caution: • Compatible USB devices are flash memory. Some USB devices may not be recognized correctly.
NOTE: • If you want to use the USB drive for storage, you must select “BDLive Storage” each time you turn off then turn on unit. • To use the BDLive feature, you must select “BDLive Storage” and you must be connected to the Internet. • The time it takes to access and download BDLive information depends on your connection speed and the file size. • To play files in HD-format, use a USB 2.0 flash drive. Status display of disc Special playback 2 Fast Forward Playback Press SEARCH 9during normal playback.
Locating desired scene 1 2 When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during playback until “Off” appears. Changing the subtitle language You can select the language when playing back a disc recorded with multilingual subtitles. Press SUBTITLE repeatedly during playback until your desired language appears. The on-screen display will disappear after a few seconds. NOTE: • Changing subtitle language is canceled when you eject the disc.
Notes on MP3/WMA/JPEG files To play back MP3/WMA/JPEG CD in the recorded order, 1. Use MP3/WMA/JPEG software that records data alphabetically or numerically. 2. Name each file including a two-digit or three-digit number (e.g. “01” “02” or “001” “002”). 3. Refrain from making too many sub-folders. To create an MP3 or WMA playlist: CAUTION: • Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
To view JPEG files: 1 2 Insert a disc with JPEG files into your unit. Press ▲/▼/◀/▶ to select the file you want to view, then press ENTER. To view JPEG properties: 1 2 3 Select a file you want to view properties for. 3 4 5 6 Press ▲ or ▼ to select a menu, then press ▶ to move to the list of menu options. For detailed information about options you can select. Press ▲ or ▼ to select an option, then press ▶ to move to the list of sub-options, then press ENTER.
Setup Menu options Icon Language Option Selects the audio language for the disc. Subtitle Selects the subtitle language for the disc. Menu Selects the menu language for the disc. OSD Selects the Setup Menu language. You can select “English”, “Français”, or “Español”. BD/DVD Output Selects the picture size, so you can match the size of the TV screen. You can select “16:9 Wide” or “16:9 Pillarbox”. Note: For a wide-screen TV, select one of the 16:9 aspect ratios.
To set parental controls: 1 2 3 4 Press TV/BD to select Blu-ray mode. 8 9 Press ▲ to select “Parental Control”, then press ▶. 10 Press ▼ to select “On”. Then press ENTER. 11 Press ◀ to save your setting and return to the previous menu level. Parental Control must be set to On for parental controls to work. Or Press SETUP to close the Setup Menu. Press SETUP. The Setup Menu will appear. Press ▲ or ▼ to select “Parental”, then press ▶. “Please Input 4-digit Parental Password” screen will appear.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Connections to other equipment (continued) To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17).
Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/Blu-ray. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/BD does not operate. • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 12 TV BROADCAST RECEPTION Poor sound or no sound.
SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE Blu-ray Disc TV/Blu-ray combo does not work • A built-in safety device may have been activated. Press POWER on the side of unit to turn it off, then turn it on again. If unit still does not turn on, unplug the power cord, wait about one minute, plug it in again, then press POWER on the side of unit. • Condensation may have formed inside unit. Turn off unit and wait about two to three hours for the condensation to evaporate.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Tuner type: AC 120V 60Hz Operation: 130W Stand by: 0.7W 13.6 kg (30.0 lbs) Width: 796 mm (31-5/16 inches) Height: 549 mm (21-5/8 inches) Depth: 300 mm (11-13/16 inches) 5˚C - 35˚C Less than 80% Outputs: Speaker: 80.1 cm (32” class/31.
