ESPAÑOL 19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER TELEVISOR LCD TFT DE 19" CON SINTONIZADOR DIGITAL HDLCD1908 HDLCD1908A HDLCD1908B HDLCD1908C ENGLISH OWNER’S MANUAL MANUAL DE INSTRUCCIONES ATTENTION ATENCION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. Si usted a comprado un control de remoto universal, por favor comunicase con el fabricante para el código de programación requerido.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. ENGLISH 2) Keep these instructions. 3) Heed all warnings. 4) Follow all applicable instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ........................................ 3 SAFETY PRECAUTIONS .............................................................. 5 Contents ........................................................................................ 6 Features......................................................................................... 7 Power source ................................................................................. 7 Parts and functions ................
Features ENGLISH • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Front Top INPUT/ENTER VOLUME POWER button button +/– buttons MENU button CHANNEL ▼/▲ buttons POWER indicator Red: Standby Green: On Remote sensor Rear side AC INPUT jack COMPONENT/AUDIO (L/R) IN jacks VIDEO IN jacks (VIDEO/S-VIDEO/AUDIO (L/R)) RF (ANT) IN jack COAXIAL DIGITAL AUDIO OUT jack PC AUDIO jack PC MONITOR IN jack To display the menu screen. Press MENU button to display the menu screen.
Remote control 2 3 10 4 11 5 12 6 7 8 9 13 14 15 16 1.POWER Button - Used to turn the power on/off to the LCD TV. 2.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 3.– Button -This button is the “–” button used when selecting digital channels. Also can display the current channel number when viewing the program. 4.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 5.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
Connections to other equipment If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component video cord. It can greatly enhance picture quality and performance.
Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, or etc. as shown below.
Setting the language Air - VHF/UHF channels Cable - CABLE TV channels turn on the TV, press POWER. 1 To(POWER indicator on the front of the unit Auto Ch Memory Signal Type Automatic Search : Select Cable Start : Adjust 6 Press EXIT to return to the normal screen. changes green. It may take approx. 10 seconds for a picture to appear on screen.) ENGLISH You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adding Channel Add/Delete If you find a new digital channel unregistered, you can add the new channel into the channel memory. Tune in the new channel. 1 2 Press MENU. The menu screen will appear. or to select “Channel”, then press 3 orPress ENTER. Press or to select “Add/Delete”, then 4 press or ENTER. Add/Delete Adding Channel Add/Delete Clear All ENTER:Set Press or to select “Adding Channel”, 5 then press or ENTER. The new channel will be 6 added into the channel memory.
To select the video input source To view a signal from another device connected to your LCD TV, such as a VCR or DVD player, press INPUT, then press / or corresponding Number buttons (0-3). You can select TV, Video, Component or PC depending on which input jacks you used to connect your devices. Source Selection 0.TV 1.Video 2.Component 3.PC [0-3]:Select CH + / - Press and release CH + / -. The channel automatically stops at the next channel set into memory.
The characters rotation as follows: - , () @ / + = - SPACE 5 6 If the character which you desire appears, press ENTER. Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters. When you finish inputting the label name, press EXIT to return to the normal screen. Repeat steps 1-5 for other channel. You can assign a label to each channel.
Movie Rating G PG PG-13 R NC-17 X : Select may take some time to be completed. ENTER:Set G PG PG-13 R : All ages : Parental guidance : Parental guidance less than 13 years old : Under 17 years old parental guidance suggested NC-17 : 17 years old and above X : Adult only / / / to select the desired rating, 6 Press then press ENTER. Press EXIT to return to the normal screen. 7 V-Chip function is activated now. To use the TV after the TV is protected.
Press or to select “Analog Caption” or 4 “Digital Caption”. 3 Press press or to select “Closed Caption”, then or ENTER. The Closed Caption menu will appear. When you select “Analog Caption”, you can choose C1, C2, C3, C4, T1, T2, T3 and T4. When you select “Digital Caption”, you can choose from CS1, CS2, CS3, CS4, CS5 and CS6. or to select “Digital CC Preset”, 4 Press then press or to select “Custom”. or to select “CC Advanced”, then 5 Press press or ENTER. The CC Advanced menu will appear.
Picture Quality Bright and dynamic picture (factory-set) Standard picture quality (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see “Picture control adjustment” below). your desired setting, press EXIT to return to 4 After the normal screen. Picture control adjustment MENU. Then press or to select 1 Press “Picture”, then press or ENTER. Press or to select “Picture Setting”, then 2 press or ENTER. The Picture Setting menu will appear. Press 3 adjust.
Cinema Wide1 picture size (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden. Film Mode A smoother motion may be obtained by setting the Film Mode to “On”. 1 Press MENU. The menu screen will appear. or to select “Picture”, then press 2 orPress ENTER. or to select “Film Mode”. 3 Press Press or to select “On” or “Off”.
After adjusting, press ENTER to return to the PC Selecting Stereo/Second 6 Setting menu. Then continue to adjust the other Press EXIT to return to the normal screen. NOTE: • If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal Monitor-screen automatically. • The PC settings are not effective for other input modes. DNR DNR (Digital Noise Reduction) can reduce the roughness of the picture. (This function is available only for analog broadcast.) MENU.
Press or ENTER to return your settings to the 3 factory settings. will appear on the screen approx. 3 4 “Reset” seconds, then it returns to the normal Adjusting the back lighting The Backlight feature adjusts the screen brightness for improved picture clarity. 1 Press MENU. The menu screen will appear. Press or to select “Setup”, then press 2 ENTER. 3 Press or to select “Backlight”. NOTE: • You also can reset the settings by pressing RESET when “Picture” and “Audio” menu is displayed.
Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS TV does not operate. • • • • • Poor sound or no sound. • • • • Poor picture • or no picture. • • • Poor reception on some channels. • • • • Poor color or no color. • • • • Picture wobbles or drifts.
Power supply: AC 120 V 60 Hz Power consumption: Operation: 55 W Stand by: 0.8 W Weight: 8.4 lbs (3.8 kg) Dimensions: Width: 19 inches (483 mm) Height: 15-25/64 inches (391 mm) Depth: 6-5/8 inches (169 mm) Inputs: 1 V (p-p)/75 ohms –8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms Pr: 0.7 V (p-p), 75 ohms Pb: 0.7 V (p-p), 75 ohms VIDEO: AUDIO: S-VIDEO: COMPONENT: PC MONITOR: PC AUDIO: Outputs: Digital audio out: ENGLISH Specifications Mini-Dsub 15pin x 1 3.
