OWNER’S MANUAL R 32” WIDE TFT LCD TELEVISION WITH DIGITAL TUNER HDLCD3200 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CABLE MODE SELECTION When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable Television) mode. If not using Cable TV, set this menu option to the “TV” position.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ....................................... 3 SAFETY PRECAUTIONS ............................................................. 5 Contents ........................................................................................ 6 Features ........................................................................................ 7 Power source ................................................................................ 7 Parts and functions ...................
Features • Integrated Digital Tuner - You can view digital broadcasting without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Top MENU button CHANNEL ▲/▼ buttons INPUT button POWER button VOLUME +/– buttons To display the menu screen. Press MENU button to display the menu screen. CHANNEL ▲/▼ buttons and VOLUME +/– buttons can be used to select the desired setting during the menu screen operations.
Remote control 1 2 8 3 9 10 4 11 5 12 6 13 14 7 15 16 1. POWER Button - Used to turn the LCD TV. 2. SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 3. Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 4. – Button -This button is the “–” button used when selecting digital channels. 5. RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. 6.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack ANT 75 ohm Coaxial Cable Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
Connections to other equipment To connect the LCD TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown. Audio cord (not supplied) Rear of the LCD TV To S-VIDEO IN 1 S-Video cord (not supplied) To AUDIO IN 1 To Audio OUT To S-Video OUT To connect the LCD TV to a DVD player with component video If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component video cord.
Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a component video cord.
Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, or etc. as shown below.
Connections to other equipment To connect the LCD TV to a Game The LCD TV can also be used as a TV device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. On-screen language selection (step 3) will automatically appear on the screen when you press MENU initially. Select the language you prefer first, then proceed with the other menu options. 1 Press MENU. The menu screen will appear. or to select 2 Press(SETUP) menu.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. TV/CABLE selection 1 Press MENU. The menu screen will appear. or to select 2 Press (SETUP) menu.
Memorizing channels Automatic memory tuning 1 Press MENU. The menu screen will appear. or to select 2 Press (SETUP) menu, then press ▲ or ▼ to select “AUTO CH MEMORY”. SETUP LANGUAGE ENGLISH TV/CABLE AUTO CH MEMORY ADD/DELETE CABLE :SELECT :ADJUST or . The TV will begin 3 Press memorizing all the channels A U TO C H M E M O RY available in your area. PROGRAMMING NOW P L E A S E WA I T CABLE • It may take from 15 minutes to 30 minutes to complete EXIT : CANCEL memorizing digital cable channels.
TV operation 1 To turn on the TV, press POWER. the volume level by 2 Adjust pressing VOL + or – . The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. the TV/CABLE menu 3 Set option to the appropriate VOLUME 25 TV - VHF/UHF channels CABLE - CABLE TV channels position (see page 18). the Direct Channel 4 Press Selection (0-9, –) buttons to select the channel.
TV operation CH / Press and release CH or . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 18 and 19 “Memorizing channels”. ANT ABCD CABLE ANALOG 12 DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear.
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any four characters to identify a channel. To create channel labels 1 Select a channel you want to label. MENU, then press 2 Press or to select (OPTION) menu. Press ▲ or ▼ to select “CH LABEL”, then press or . The CH LABEL menu will appear. OPTION CH LABEL VIDEO LABEL :SELECT :ADJUST Press ▲ or ▼ to select “SET/ 3 CLEAR”. Press or to select “SET”.
Selecting the video input source/Labeling the video input source Selecting the video input source Press INPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, VIDEO1, VIDEO2, COMPONENT, HDMI or PC depending on which input jacks you used to connect your devices. SOURCE SELECTION 0 : ANT 1 : VIDEO1 2 : VIDEO2 3 : COMPONENT 4 : HDMI 5 : PC Pressing INPUT SELECT on the remote control displays the current signal source.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV RATING” and “MOVIE RATING” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register a password MENU. The menu 1 Press screen will appear. Then press or to select (LOCKS) menu.
Setting the V-Chip To set the V-Chip MENU. 1 Press Then press or to select (LOCKS) menu. LOCKS V- C H I P S E T N E W PA S S W O R D :SELECT Press ▲ or ▼ to display the 2 password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. :ADJUST LOCKS PA S S WO R D [0-9] : SELECT 3 Press ▲ or ▼ to select “V-CHIP SET”, then press or . The VCHIP SET menu appears. Press ▲ or ▼ to select “TV 4 RATING”.
Setting the V-Chip To change the password 1 Press MENU. The TV menu screen will appear. or to select 2 Press (LOCKS) menu. LOCKS V-CHIP SET NEW PASSWORD :SELECT :ADJUST Press ▲ or ▼ to display the 3 password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. LOCKS PASSWORD [0-9] : SELECT ENTER : SET EXIT : END Press ▲ or ▼ to select 4 “NEW PASSWORD”, then press or .
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.
CC advanced Closed Captions are factory preset however you can adjust them individually as follows: This feature is designed to customize Digital Captions only. 1 Press MENU. The menu screen will appear. or to select 2 Press (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE A U TO C H M E M O RY ADD/DELETE CABLE :SELECT :ADJUST Press ▲ or ▼ to select “CC 3 ADVANCED”, then press or . The CC ADVANCED menu will appear.
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes—NATURAL, CINEMA WIDE1, CINEMA WIDE2, CINEMA WIDE3, and FULL. Selecting the picture size MENU. Press or to 1 Press select (SETUP) menu. Press ▲ or ▼ to select “PICTURE SIZE”. SETUP PICTURE SIZE PICTURE SCROLL CINEMA MODE ASPECT SIGNAL METER AUTO SHUT OFF FILM OFF OFF :SELECT or . The PICTURE 2 Press SIZE menu will appear.
Setting the picture size NOTES: • The PICTURE SIZE feature is not available for some program formats (such as 1080i or 720p). Such formats will display in FULL. • The PICTURE SIZE feature is in the PC mode only for NATURAL or FULL. • In CINEMA WIDE2 picture size, some of the on screen display items may be positioned off the visible portion of the screen. You can use Picture Scroll, as explained on the right, to view off screen items.
Setting the picture scroll You can scroll the picture in CINEMA WIDE2 and CINEMA WIDE3 MENU in CINEMA 1 Press WIDE2 or CINEMA WIDE3 mode. Then press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE A U TO C H M E M O RY ADD/DELETE CABLE :SELECT :ADJUST Press ▲ or ▼ to select 2 “PICTURE SCROLL”. SETUP PICTURE SIZE PICTURE SCROLL CINEMA MODE ASPECT SIGNAL METER A U TO S H U T O F F :SELECT FILM OFF OFF :ADJUST or to display the 3 Press SCROLL ADJUSTMENT mode.
Selecting the cinema mode/Using the aspect feature Selecting the cinema mode A smoother motion may be obtained by setting the Picture Mode to Film when you view a DVD from the DVD player connected with the component input. MENU, then press or 1 Press to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE A U TO C H M E M O RY ADD/DELETE CABLE :SELECT :ADJUST ▲ or ▼ to select CINEMA 2 Press MODE, then press or to select “FILM”.
Adjusting the picture preference/Picture control adjustment You can select four picture modes—SPORTS, STANDARD, MOVIE, and MEMORY—as described in the following table: Adjusting the picture preference MENU, then press or 1 Press to select (PICTURE) menu. PICTURE PICTURE PREFERENCE SPORTS BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT 2 :ADJUST Press ▲ or ▼ to select “PICTURE PREFERENCE”.
Selecting the color temperature/ Adjusting the backlighting Selecting the color temperature Change the picture quality by selecting from three preset color temperatures—COOL, MEDIUM, and WARM: MENU, then press or 1 Press to select (PICTURE) menu. PICTURE PICTURE PREFERENCE SPORTS BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT :ADJUST Press ▲ or ▼ to select “COLOR 2 TEMPERATURE”. Press or you prefer.
Resetting your picture adjustments The RESET function returns your picture quality adjustments to the following factory settings: PICTURE PREFERENCE ...... SPORTS BRIGHTNESS ...................... center (25) CONTRAST ............................ max (50) COLOR ................................ center (25) TINT .............................. center (0) SHARPNESS .............. center (25) COLOR TEMPERATURE ... COOL MENU, then press or 1 Press to select (PICTURE) menu.
Selecting Stereo/Second Audio Program (SAP)/ Sound control adjustment The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” displays onscreen every time you turn the TV on, change the channel, or press DISPLAY.
Selecting the HDMI audio input source/ Selecting the audio language Selecting the HDMI audio input source When you use HDMI AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”. MENU. Then press or 1 Press to select (AUDIO) menu. AUDIO MTS BASS TREBLE BALANCE SURROUND STEREO 25 25 0 OFF :SELECT :ADJUST Press ▲ or ▼ to select “HDMI”, 2 then press or to select AU D I O “HDMI” or “DVI”.
Selecting the digital output/ Resetting your audio adjustments Selecting the digital output You can choose the format of the digital audio output signal. MENU, then press or 1 Press to select (AUDIO) menu. AUDIO M TS BASS TR E B LE B A LA N C E S U R R OU N D :S E LE C T S TE R E O 25 25 0 OFF :A D J U S T Press ▲ or ▼ to select “DIGITAL 2 OUTPUT”, then press or to select “PCM” or “DOLBY DIGITAL”.
Checking the Digital-signal strength This TV will allow you to view the digital signal meter for digital channels. MENU, then press or 1 Press to select (SETUP) menu. S E TU P LA N GU A GE E N GLI S H TV / C A B LE A U TO C H M E M ORY A D D / D E LE TE C A B LE :S E LE C T :A D J U S T Press ▲ or ▼ to select 2 “SIGNAL METER”.
Setting the auto shut off In case of “AUTO SHUT OFF” feature is “ON”, if a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. MENU, then press or 1 Press to select (SETUP) menu. S E TU P LA N GU A GE E N GLI S H TV / C A B LE A U TO C H M E M ORY A D D / D E LE TE C A B LE :S E LE C T :A D J U S T Press ▲ or ▼ to select “AUTO 2 SHUT OFF”.
Picture/Audio control adjustment in the PC mode PC Monitor Menu There are a number of picture and audio settings you can adjust to optimize the performance of the TV in PC mode. Press INPUT SELECT repeatedly to select PC mode. Press MENU. The PC Monitor Menu will appear.
Picture/Audio control adjustment in the PC mode Resetting your picture/audio adjustment in the PC mode The RESET function returns your picture/audio adjustment to the following factory settings: PICTURE menu BRIGHTNESS ........... center (25) CONTRAST ................. max (50) RED ........................... center (25) GREEN ..................... center (25) BLUE ......................... center (25) BACKLIGHTING .......... max (16) AUDIO menu BASS ...................... center (25) TREBLE ..............
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. TV does not • Try another AC outlet. • Power is off, check fuse or circuit breaker. operate. • Unplug unit for an hour, then plug it back in.
Specifications Power supply: AC 120 V 60 Hz Power consumption: Operation: 170 W Stand by: 1 W Weight: 35.3 lbs (16.0 kg) Dimensions: Width: 32-3/8 inches (822 mm) Height: 23-3/4 inches (604 mm) Depth: 11-1/8 inches (282.5 mm) Inputs: 1 V (p-p)/75 ohms –8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms PR: 0.7 V (p-p), 75 ohms PB: 0.7 V (p-p), 75 ohms VIDEO: AUDIO: S-VIDEO: COMPONENT: Digital audio out: 0.
R LIMITED WARRANTY 32” WIDE LCD TELEVISION ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
Printed in Thailand J32D0101A SH 07/02 N 32D0101A_En_p43-back 48 1/17/07, 2:14 PM