ow. .,s /If SAN S U 37" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER HDLCD3700D ((jllmllm_ )DOLBY .......................... OIGITAL I T HlOll-rl( .,_..,_, ,,.,,o,_ .o ,,. ,,,_ ,,...=^o TM ................ .......................... .......... If you purchase a universal remote control from your local retailer, please contact the remote manufacI turer for the required programming code.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the CAUTION presence of uninsutated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE SHOCK, THE RISK OF ELECTRIC DO NOT REMOVE (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. QUALIFIED WARNING: CAUTIO N: WARNING: CAUTION: REFER SERVICING SERVICE TO PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS ) Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus 6 Clean only with a clean dry cloth. 7 Do not block any ventilation 8 Do not install near any heat sources amplifiers) that produce heat. 9) Do not defeat the safety with one wider than the wide blade and the third consult an electrician to near water. openings.
IMPORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents 6 IMPORTANT SAFETY INSTRUCTIONS ........................................ SAFETY PRECAUTIONS .............................................................. Contents ........................................................................................ Features ......................................................................................... Power source ................................................................................. Parts and functions ..................................
Featu res • Integrated Digital Tuner -You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Front Right side > CHANNEL I/v buttons VOLUME +/buttons MENU button INPUT button POWER button Remote sensor POWER indicator Red: Standby Green: On Back side MON#OR _ PC MONITOR PCiHDMI AUDIO_ PC/HDMI IN jack AUDIO IN jack HDMI 1 IN jack I HDMI2III_ HDMI 2 IN jack r I / / COMPONENT i ©_© ;_ COMPONENT IN jacks AUDIO (L/R) jacks (for COMPONENT IN and AV2 VIDEO IN) VAR AUDIO AV2 VIDEO IN jack VAR (VARIABLE) AVl IN (jaCkL/CRk)_ RF (ANT) (VIDEO/S-VIDEO/AUDIO CO
Remote control 6.CH (CHANNEL) +/-/CURSOR • / • Buttons - Used to operate the menu functions of the LCD TV, and to change the channels of the LCD TV. 8 9 10 11 12 13 14 15 16 1. POWER Button - Used to turn the power on/off to the LCD TV. 2. SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 3. Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 4.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination to your VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect Antenna Jack Antenna Jack antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box, Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams your particular assortment interconnections only. To connect the LCD below are offered as suggestions. You may need to modify them to accommodate of components.
Connections To connect the LCD TV to a DVD If your DVD player or Satellite player/Satellite to other equipment receiver receiver has a S-Video out jack, connect cords as shown. Rear of the LCD TV To S-VIDEO IN To S-Video OUT S-Video cord (not supplied) Audio cord (not supplied) (_ To AVl AUDIO (L/R) IN To connect the LCD To Audio OUT TV to a DVD If your DVD player has component video cord.
Connections To connect the to other equipment LCD TV to a DTV If you connect a DTV receiver/set-top component video cord. receiver/set-top box, connect box your LCD TV to a DTV receiver/set-top box using a Rear of the LCD TV HDMI2 TO COMPONENT IN II I '"Z_l_ I I-oMp ......... _ iI_I IN _ ,_D I To Component [ po_C_ €O..-,/ (not supplied) _ VIDEO AUDIO Ill _l__ To connect / o@o o / _ VAI_!O_,5_11 .............................
Connections to other equipment To connect the LCD TV to a Game or a Camcorder The LCD TV can also be used as a TV device for many video games or camcorders. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Connections to other equipment To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV's remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers (see "Turning off the built-in speakers" on page 26). Rear of the TV r VA.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. Press EXIT to return to the normal screen. To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) 2 3 CABLE CHART The chart below is typical of many cable system channel allocations.
Adding Channel If you find a new channel unregistered, you can add the new channel into the channel memory. Tune in the new channel. Press MENU.The menu screen will appear. Press EXIT to return to the normal screen. Press • or • to select"Channer', ENTER. then press • or Press • or • to select"Add/Delete", or ENTER. then press • TV operation To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.
RECALL NOTE: • If a channel with no broadcast is selected, the sound will automatically be muted. • It may take a few seconds for a digital channel picture to appear on screen after being selected. This button allows you to go back to the last channel selected by pressing RECALL. Press RECALL again to return to the last channel you were watching.
To register a password [* 0"'9 _AI'_ZpA_-' '0_/+=-_] If the character ENTER. which you desire appears, press Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters. Press MENU.The menu screen will appear. Press • or • to select "Lock", then press • or ENTER. Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER. When finishto inputting the screen.
Movie Rating If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content additional rating system. G PG PG-13 R N0-17 X :All ages : Parental guidance : Parental guidance less than 13 years old : Under 17 years old parental guidance suggested : 17 years old and above :Adult only Press •/v/,/• press ENTER. to select the desired rating, then Press EXIT to return to the normal screen.
Press • or • to select"Analog Caption" or"Digital Caption". When you select "Analog Caption", you can choose C1, C2, C3, C4, T1, T2, T3 and T4. When you select "Digital Caption", you can choose from CS1, CS2, CS3, CS4, CS5 and CS6. 5 6 Press .< or • to select the desired Closed Caption mode for both Digital and Analog Caption. 4 5 6 Press • or • to select "Closed Caption", press • or ENTER. The Closed Caption menu will appear.
2 Quality nd dynamic picture (factory-set) rd picture quality (factory-set) ike picture setting (factory-set) sonal preferences (set by you; ture control adjustment" below). 3 Press • or • to select "Picture Setting", press • or ENTER. The Picture Setting menu will appear. then Press • or • to select "Color Temperature", then press • or • to change the setting. After your desired setting, press EXIT to return to the normal screen. Picture control adjustment Press MENU.
Cinema Wide1 picture size (for Film Mode 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden. A smoother motion may be obtained by setting the Film Mode to "On" when you view a DVD from the DVD player connected with the component input. Press MENU.The menu screen will appear. Press • or • to select"Picture", ENTER.
6 7 After adjusting, press ENTER to return to the PC Setting menu. Then continue to adjust the other items. Press EXIT to return to the normal screen. NOTE: • If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal Monitor-screen automatically. • The PC settings are not effective for other input modes. Selecting Stereo/Second Audio Program (SAP) The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound.
Selecting the HDMI audio input source When you use PC/HDMI AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from "HDMI" or "DVI', Press MENU.The menu screen will appear. Press • or • to select"Audio", ENTER. then press • or Press • or • to select"HDMI1 Press < or _,-to select "HDMr' Audio". or "DVI". Press < or • to adjust the setting. Press EXIT to return to the normal screen.
Reception d istu rbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. 1 Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. rSYMPTOMS TV does POSSIBLE SOLUTIONS • rSYMPTOMS • Make sure the power cord is ptugged in. • Try another AC outtet. • Power is off, check fuse or circuit breaker. not operate. • Unptug in.
Specifications Power supply: AC 120 V 60 Hz Power consumption: Operation: Stand by: Weight: 35.3 Ibs (16.0 kg) Dimensions: Width: Height: Depth: Inputs: 1 V (p-p)/75 ohms -8 dBm/50k ohms VIDEO: AUDIO: S-VIDEO: COMPONENT: HDMI: Outputs: Y: C: Y: Pr: Pb: 175 W 1W 37-3/8 inches 27-3/8 inches 11-1/8 inches 1 V (p-p), 75 ohms 0.286 V (p-p), 75 ohms 1 V (p-p), 75 ohms 0.7V (p-p), 75 ohms 0.
tJSANSUI® LIMITED WARRANTY 37" WIDE LCD TELEVISION ORION warrants this product to be free from manufacturing defects in material and workmanship normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII J36E0101A SH 08/05 [] Printed in Thailand