Operation Manual

19
HDMI device
DVI device
Connections to other equipment
To connect the Plasma TV to a HDMI or a DVI device
Rear lower of the Plasma TV
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
or
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate
analog audio cords are required.
NOTES:
•
You must choose an appropriate setting for each connection (see “Selecting the HDMI audio input source” on page 46).
• You can also use HDMI-1 IN for DVI device connection. In this case, you must connect the audio cables to AUDIO L/R, not
AUDIO.
NOTES:
•
When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL “ON”. If you do, a
loud noise will emit from the speakers possibly causing damage to your hearing or to the speakers.
• This unit does not apply to DTS audio. There will be no sound output if connected to AV amplifier with built-in DTS decoder.
Coaxial digital cable
(not supplied)
AV Amplifier with built-in digital surround
decoder as listed above
Center Speaker
Coaxial Digital Audio Output
To Coaxial Digital Audio Input
Rear lower of the Plasma TV
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, or etc as shown below.
Front
Speaker
(Left)
Front
Speaker
(Right)
Subwoofer
Surround
Speaker (Left)
Surround
Speaker
(Right)
TV
Optical Digital Audio Output
Optical
digital
cable (not
supplied)
To Optical Digital
Audio input
3X81001A_En_p14-21 06.8.22, 4:10 PM19