Operation Manual

23
1
Press MENU. The menu screen will appear.
2
Press or to select
(SETUP) menu.
3
Press ▲ or ▼ to select
“TV/CABLE”.
4
Press or to select
“TV” or “CABLE”.
5
Press EXIT to return to the normal screen.
This TV is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the TV’s memory. This TV can receive up to 250 VHF/UHF channels and 500 cable
TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV mode. When
shipped from the factory, this menu option is in the CABLE mode.
TV/CABLE selection
TV - VHF/UHF channels
CABLE - CABLE TV channels
CABLE CHART
The chart below is typical of many cable system channel allocations.
Memorizing channels
NOTE:
It may take a few seconds for a digital
channel picture to appear on screen
after being selected.
3X81001A_En_p22-27 06.8.22, 4:10 PM23