Operation Manual

32
Setting the panel lock
1
Press MENU, then press or
to select (LOCKS) menu.
2
Press ▲ or ▼ to display the
password entering mode. Use the
Number buttons (0-9) to enter
your password, then press ENTER.
The LOCKS menu appears.
3
Press ▲ or ▼ to select “PANEL
LOCK” and press or to select
“ON”.
If a button on the front panel is
pressed, the message “NOT
AVAILABLE” appears.
4
Press EXIT to return to the normal screen.
To lock the front panel
You can lock the front panel
buttons to prevent your settings
from being changed accidentally
(by children, for example). When
the panel lock is ON, all control
buttons on the Plasma TV front
panel (except POWER) do not
operate.
To unlock the front panel
Press and hold VOLUME ▼ on the front panel of Plasma TV for
about 10 seconds until the message “PANEL LOCK:OFF” appears
on the screen.
1
Press MENU, then press or
to select (LOCKS) menu.
2
Press ▲ or ▼ to display the
password entering mode.
Use the Number buttons (0-9)
to enter your password, then press
ENTER. The LOCKS menu
appears.
3
Press ▲ or ▼ to select “PANEL
LOCK”, then press or to
select “OFF”.
4
Press EXIT to return to the normal screen.
You also can unlock the front panel using the menus
LOCKS
PASSWORD
[0-9] : SELECT ENTER : SET
EXIT : END
LOCKS
V-CHIP SET
NEW PASSWORD
:SELECT :ADJUST
LOCKS
PASSWORD
[0-9] : SELECT ENTER : SET
EXIT : END
LOCKS
V-CHIP SET
NEW PASSWORD
:SELECT :ADJUST
LOCKS
PANEL LOCK ON/OFF
NEW PASSWORD
:SELECT :ADJUST
LOCKS
PANEL LOCK ON/OFF
NEW PASSWORD
:SELECT :ADJUST
3X81001A_En_p32-35 06.8.22, 4:11 PM32